changed Agentless Management Service (iLO 6) for Red Hat Enterprise Linux 9 Server for ARM-based Servers Agentless Management Service (iLO 6) for Red Hat Enterprise Linux 9 Server for ARM-based Servers ams_rhel9_aarch64 ams_rhel9_aarch64 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM Lights Out Lights Out 服务器 Server 软件 - 系统管理 Software - System Management 英语（美国） English (US)

  • amsd supported on HPE Gen11 Servers and later generations

  • amsd provides information to the iLO 6 service providing SNMP support.

    • ]]>

  • amsd supported on HPE Gen11 Servers and later generations

  • amsd provides information to the iLO 6 service providing SNMP support.

    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    • To install the package type:
      • rpm -Uvh amsd-<version>.rpm
    • To check whether the package is loaded properly type:
      • systemctl status amsd
      • systemctl status smad
    • Additional help is available by typing:
      • man amsd
    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    • To install the package type:
      • rpm -Uvh amsd-<version>.rpm
    • To check whether the package is loaded properly type:
      • systemctl status amsd
      • systemctl status smad
    • Additional help is available by typing:
      • man amsd
    ]]>         2f317b9d-c9e3-4d76-bff6-b9d0d085a952 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 103c 3306 1590 3307 103c 3307 1590 3307 103C 3306 1590 00E4 103C 3307 1590 00E4 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm amsd-3.5.0-1869.47.rhel9.aarch64.rpm amsd-3.5.0-1869.47.rhel9.aarch64.rpm file://./packages/amsd-3.5.0-1869.47.rhel9.aarch64.rpm ./etc/sysconfig/ahslog ./etc/sysconfig/amsd ./etc/sysconfig/amsd_rev ./etc/sysconfig/cpqFca ./etc/sysconfig/cpqFca_rev ./etc/sysconfig/cpqIde ./etc/sysconfig/cpqIde_rev ./etc/sysconfig/cpqiScsi ./etc/sysconfig/smad ./etc/sysconfig/smad_rev ./opt/amsd ./opt/amsd/amsd.license ./sbin/ahslog ./sbin/cpqiScsi ./usr/lib/.build-id ./usr/lib/.build-id/1a ./usr/lib/.build-id/1a/3249aa6f33aeab9f286deb82a8417b32fe7c65 ./usr/lib/.build-id/23 ./usr/lib/.build-id/23/66fcd4ab25262dddae31a8c83f8f258b82f3aa ./usr/lib/.build-id/23/66fcd4ab25262dddae31a8c83f8f258b82f3aa.1 ./usr/lib/.build-id/72 ./usr/lib/.build-id/72/14efca933c7adddb1faaa9d72ae793c1240f77 ./usr/lib/.build-id/72/14efca933c7adddb1faaa9d72ae793c1240f77.1 ./usr/lib/.build-id/8a ./usr/lib/.build-id/8a/b6019774ba31a9b01ab909a8af4403b56fe675 ./usr/lib/.build-id/8a/b6019774ba31a9b01ab909a8af4403b56fe675.1 ./usr/lib/.build-id/b7 ./usr/lib/.build-id/b7/1894119f57eda5daf7421e873ab48cee42228b ./usr/lib/.build-id/e5 ./usr/lib/.build-id/e5/8d2ac891ee5976697aef3a1b8246edcb60f202 ./usr/lib/.build-id/e5/8d2ac891ee5976697aef3a1b8246edcb60f202.1 ./usr/lib/systemd/system/ahslog.service ./usr/lib/systemd/system/amsd.service ./usr/lib/systemd/system/amsd_rev.service ./usr/lib/systemd/system/cpqFca.service ./usr/lib/systemd/system/cpqFca_rev.service ./usr/lib/systemd/system/cpqIde.service ./usr/lib/systemd/system/cpqIde_rev.service ./usr/lib/systemd/system/cpqiScsi.service ./usr/lib/systemd/system/smad.service ./usr/lib/systemd/system/smad_rev.service ./usr/lib/udev/rules.d/81-cpqFca.rules ./usr/lib/udev/rules.d/81-cpqiScsi.rules ./usr/share/man/man8/ahslog.8.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqIde.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/smad.8.gz ./usr/share/smartupdate/amsd/component.xml ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqFca_rev ./sbin/cpqIde ./sbin/cpqIde_rev ./sbin/smad ./sbin/smad_rev     changed Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631432AS-ADAI Online Firmware Upgrade Utility for Linux RPM aarch64 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM 网络 Networking 服务器 Server 固件 - 网络 Firmware - Network 英语（美国） English (US) pdating firmware with rpm installed:

    • Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gnu' location.
    • The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder. 
    • From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gnu/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
    • To uninstall, run: rpm -e <rpm_package_name>

    Updating firmware without installing rpm:

    • Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
    • This will extract the contents of the rpm to 'usr' folder in the current directory.
    • From the terminal, navigate to '/usr/lib/aarch64-linux-gnu/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

     

    On Secure Boot Enable mode:

    This product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
    Also, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.

    ]]>         pdating firmware with rpm installed:

    • Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gnu' location.
    • The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder. 
    • From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gnu/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
    • To uninstall, run: rpm -e <rpm_package_name>

    Updating firmware without installing rpm:

    • Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
    • This will extract the contents of the rpm to 'usr' folder in the current directory.
    • From the terminal, navigate to '/usr/lib/aarch64-linux-gnu/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

     

    On Secure Boot Enable mode:

    This product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
    Also, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.

    ]]>         This software package contains the following firmware versions:

    Mellanox Ethernet Only Adapters Firmware Version PSID
    Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE  (P42041-B21) 26.41.1000 MT_0000000551
    ]]>         This software package contains the following firmware versions:

    Mellanox Ethernet Only Adapters Firmware Version PSID
    Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE  (P42041-B21) 26.41.1000 MT_0000000551
    ]]>         15b3 101f 15b3 0007 15B3 101E 15B3 0007 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:nic_mlnx_mcx631432as_adai firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1.aarch64.rpm firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1.aarch64.rpm file://./packages/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1 ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/CP060899.xml ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/acpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/fw-ConnectX6Lx-rel-26_41_1000-MCX631432AS-ADA_Ax-UEFI-14.34.12-FlexBoot-3.7.400.signed.bin ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/ilorest_chif.so ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/mft-4.28.0-92.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/mlxfwmanager ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631432as-adai-mt-0000000551-26.41.1000-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP060899.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP060899.scexe 79F0C163-0C13-4662-9DEA-09235FEF90CB MT_0000000551 10 .//fw-ConnectX6Lx-rel-26_41_1000-MCX631432AS-ADA_Ax-UEFI-14.34.12-FlexBoot-3.7.400.signed.bin 600 1 True Firmware False a6b1a447-382a-5a4f-15b3-101f15b30012 26.41.1000 ComboFirmware RuntimeAgent     changed Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 法语,英语（美国）,德语,意大利语,日语,西班牙语 French,English (US),German,Italian,Japanese,Spanish On RPM-based Linux system:

    Update firmware by installing the rpm:

    • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
    • The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.  
    • To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

    Updating firmware without installing the rpm:

    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
    • Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

    Additional Information:

    Installing the firmware rpm package does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

    ]]>         On RPM-based Linux system:

    Update firmware by installing the rpm:

    • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
    • The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.  
    • To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

    Updating firmware without installing the rpm:

    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
    • Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

    Additional Information:

    Installing the firmware rpm package does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

    ]]>         Deliverable Name:
             Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives

    Release Version and/or Date:
             HPK5

     

    ]]>         Deliverable Name:
             Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives

    Release Version and/or Date:
             HPK5

     

    ]]>         VV007680LXUJF VV015360LXUJH MV006400LXUJL VV003840LXUJE MV003200LXUJK CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-44d456ce65-HPK5-1.1.aarch64.rpm firmware-hdd-44d456ce65-HPK5-1.1.aarch64.rpm file://./packages/firmware-hdd-44d456ce65-HPK5-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/CP062049.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/KACM7ALEHPK5.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062049.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP062049.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 MV003200LXUJK 10 False KACM7ALEHPK5.rel 300 1 False Firmware False 4d2340a5-3056-3330-3230-304c58554a4b HPK5 MV006400LXUJL 10 False KACM7ALEHPK5.rel 300 1 False Firmware False 4d2340a5-3056-3630-3430-304c58554a4c HPK5 VV003840LXUJE 10 False KACM7ALEHPK5.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304c58554a45 HPK5 VV007680LXUJF 10 False KACM7ALEHPK5.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304c58554a46 HPK5 VV015360LXUJH 10 False KACM7ALEHPK5.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304c58554a48 HPK5 Firmware RuntimeAgent     changed ROM Flash Firmware Package - HPE ProLiant DL384 Gen12 (R13) Servers ROM Flash Firmware Package - HPE ProLiant DL384 Gen12 (R13) Servers HPE DL384 Gen12 (R13) Servers HPE DL384 Gen12 (R13) Servers 惠普企业 Hewlett Packard Enterprise 服务器 Server BIOS - System ROM BIOS - System ROM 英语（美国） English (US) To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>


    This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately.

    ]]>         To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>


    This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately.

    ]]>         cpqsetup.exe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 300 firmware:system R13_1.14_11_08_2024.fwpkg R13_1.14_11_08_2024.fwpkg file://./packages/R13_1.14_11_08_2024.fwpkg payload.json R13_1.14_11_08_2024.signed.flash R13_1.14_11_08_2024.xml aa148d2e-6e09-453e-bc6f-63baa5f5ccc4 System BIOS - R13 0 True R13_1.14_11_08_2024.signed.flash 300 1 False True False False Firmware True 00000000-0000-0000-0000-000000000272 v1.14 (11/08/2024) FWPKG-v2 Firmware Bmc 1200212 en BIOS - System ROM en This firmware package provides updated system firmware that can be installed online through the use of tools such as Smart Update Manager (SUM) and the RESTful Interface Tool (iLOrest) on supported Operating Systems. Additionally, when used in conjunction with SUM or iLOrest, this firmware package allows the user to update firmware on remote servers from a central location. This remote deployment capability eliminates the need for the user to be physically present at the server in order to perform a firmware update. 6 tw 伺服器 en Server ko 서버 ja サーバ cn 服务器 a5747f530b554b468913296ae995623a 7c53072d40b447e3baf37f207333fa7f cpqsetup.exe no yes 300 tw 安裝後必須重新啟動，更新才會生效，並維持硬體穩定。 en Reboot is required after installation for updates to take effect and hardware stability to be maintained. ko 업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅해야 합니다. ja アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 cn 安装之后必须重启才能使更新生效并保持硬件稳定性。 yes en Hewlett Packard Enterprise cn 惠普企业 en ROM Flash Firmware Package - HPE ProLiant DL384 Gen12 (R13) Servers 11000 0 0 Cross Operating System oi OEM 7 0 VMware ESXi 7.0 vmware_esx_server OEM 8 0 VMware ESXi 8.0 vmware_esx_server OEM False 2024-11-14T05:30:22 1.0.0.0 R13 HPE ProLiant Compute DL384 Gen12 FTP FTP-Only System R13 firmware:system     changed ROM Flash Firmware Package - HPE ProLiant RL300 Gen11 (R11) ROM Flash Firmware Package - HPE ProLiant RL300 Gen11 (R11) 惠普企业 Hewlett Packard Enterprise 服务器 Server BIOS - System ROM BIOS - System ROM 英语（美国） English (US) To flash this firmware package, use the following iLOrest command.  See https://www.hpe.com/info/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

    ]]>         To flash this firmware package, use the following iLOrest command.  See https://www.hpe.com/info/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

    ]]>         安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system R11_1.72_09_19_2024_scp_2.10.20240201_appended_binded.fwpkg R11_1.72_09_19_2024_scp_2.10.20240201_appended_binded.fwpkg file://./packages/R11_1.72_09_19_2024_scp_2.10.20240201_appended_binded.fwpkg payload.json R11_1.72_09_19_2024_scp_2.10.20240201_appended_binded.xml R11_1.72_09_19_2024_scp_2.10.20240201_appended_binded_signed.bin 231cd606-a7f5-4ab6-bed8-823582227a3d BIOS_SCP BUNDLE 0 True R11_1.72_09_19_2024_scp_2.10.20240201_appended_binded_signed.bin 120 1 False True True False Firmware True 00000000-0000-0000-0000-000000000250 2.10.20240201 FWPKG-v2 Firmware Bmc 1200212 en BIOS - System ROM en This firmware package provides updated system firmware that can be installed online through the use of tools such as Smart Update Manager (SUM) and the RESTful Interface Tool (iLOrest) on supported Operating Systems. Additionally, when used in conjunction with SUM or iLOrest, this firmware package allows the user to update firmware on remote servers from a central location. This remote deployment capability eliminates the need for the user to be physically present at the server in order to perform a firmware update. ja このファームウェアパッケージは、サポート対象のオペレーティングシステムでSmart Update Manager（SUM）やRESTfulインターフェイスツール（iLOrest）などのツールを使用して、オンラインでインストールできるアップデートされたシステムファームウェアを提供します。さらに、SUMまたはiLOrestと共に使用する場合、このファームウェアパッケージは、ユーザーが中央ロケーションからリモートサーバー上のファームウェアをアップデートすることを可能にします。このリモート展開機能により、ファームウェアをアップデートするために使用者がサーバーへ物理的に移動する必要がなくなります。 6 tw 伺服器 en Server ko 서버 ja サーバ cn 服务器 4742f9d3cc464355ba3857b16f5bb333 10b224a98b12458abb55469cd62ed934 no no 0 tw 安裝後必須重新啟動，更新才會生效，並維持硬體穩定。 en Reboot is required after installation for updates to take effect and hardware stability to be maintained. ko 업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅해야 합니다. ja アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 cn 安装之后必须重启才能使更新生效并保持硬件稳定性。 yes en Hewlett Packard Enterprise cn 惠普企业 en ROM Flash Firmware Package - HPE ProLiant RL300 Gen11 (R11) ja ROMフラッシュファームウェアパッケージ - HPE ProLiant RL300 Gen11（R11） 32000 7 0 VMware ESXi 7.0 vmware_esx_server OEM 0 0 Cross Operating System oi OEM False 2024-09-02T05:46:30 1.0.0.0 R11 HPE ProLiant RL300 Gen11 R11 firmware:system     changed Firmware Package - UBM5 Backplane PIC PLDM Firmware for Gen11/Gen12 servers usage Firmware Package - UBM5 Backplane PIC PLDM Firmware for Gen11/Gen12 servers usage Firmware Package - UBM5 Backplane PIC PLDM Firmware for Gen11/Gen12 servers usage Firmware Package - UBM5 Backplane PIC PLDM Firmware for Gen11/Gen12 servers usage 惠普企业 Hewlett Packard Enterprise 服务器选项 ServerOptions 服务器 Server 固件 - 系统 ROM Firmware - System 英语（美国） English (US)
  • iLO 6 version 1.62 or later is required for Gen12 servers
  • iLO 6 version 1.10 or later is required for Gen11 servers
    • ]]>
  • iLO 6 version 1.62 or later is required for Gen12 servers
  • iLO 6 version 1.10 or later is required for Gen11 servers
    • ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

        localhost OS example:
        ilorest flashfwpkg <file_name.fwpkg> 

        remote example:
        ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

        Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

         Update the firmware and software in the usual manner.

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

        localhost OS example:
        ilorest flashfwpkg <file_name.fwpkg> 

        remote example:
        ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

        Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

         Update the firmware and software in the usual manner.

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    ]]>         9675b54e-1c96-44c3-a7a1-901505000000 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 1200 firmware:sd:ubm HPE_UBM5_1.10_B.fwpkg HPE_UBM5_1.10_B.fwpkg file://./packages/HPE_UBM5_1.10_B.fwpkg HPE_UBM5_1.10_B.HPb HPE_UBM5_1.10_B.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM5 Backplane PIC 0 True HPE_UBM5_1.10_B.HPb 1200 1 True False False True Firmware True 9675b54e-1c96-44c3-a7a1-901505000000 1.10 FWPKG-v2 Firmware Bmc 2900027 tw 韌體 ─ 系統 en Firmware - System ko 펌웨어 - 시스템 ja ファームウェア - システム cn 固件 - 系统 ROM en This firmware package contains PLDM firmware for UBM5 storage backplanes. 68 en ServerOptions ko 서버 옵션 ja サーバ オプション cn 服务器选项 6 tw 伺服器 en Server ko 서버 ja サーバ cn 服务器 6ca442c991c749709fbf69d8d57a3358 738858ad670a41649c53a7daae2da47f no yes 1200 tw 安裝後無需重新啟動，更新就會生效，並維持硬體穩定。 en Reboot is not required after installation for updates to take effect and hardware stability to be maintained. ko 설치 후 재부팅하지 않아도 업데이트가 적용되고 하드웨어 안정성이 유지됩니다. ja アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。 cn 安装之后无需重启即可使更新生效并可保持硬件稳定性。 no 2024-09-12T08:15:50.0653602+00:00 en Hewlett Packard Enterprise cn 惠普企业 en Firmware Package - UBM5 Backplane PIC PLDM Firmware for Gen11/Gen12 servers usage 11000 9675b54e-1c96-44c3-a7a1-901505000000 nvmeubmpicnew 0 0 Cross Operating System oi OEM 7 0 VMware ESXi 7.0 vmware_esx_server OEM 10 18999 17600 0 Microsoft Windows Server 2019 nt_x86-64 OEM 8 0 Red Hat Enterprise Linux 8 Server red_hat_enterprise_linux_x86_64 OEM 15 0 SUSE Linux Enterprise Server 15 suse_linux_enterprise_server_x86_64 OEM 10 25398 20317 0 Microsoft Windows Server 2022 nt_x86-64 OEM 8 0 VMware ESXi 8.0 vmware_esx_server OEM 9 0 Red Hat Enterprise Linux 9 Server red_hat_enterprise_linux_x86_64 OEM 10 25399 0 Microsoft Windows Server 2025 nt_x86-64 OEM False 2024-10-12T07:57:44 1.0.0.0 A55 HPE ProLiant DL365 Gen11 Server A55 HPE ProLiant DL385 Gen11 Server A56 HPE ProLiant DL325 Gen11 Server A56 HPE ProLiant DL345 Gen11 Server U58 HPE Alletra 4110 Server R13 HPE ProLiant Compute DL384 Gen12 U54 HPE ProLiant DL360 Gen11 Server U54 HPE ProLiant DL380 Gen11 Server U59 HPE ProLiant DL560 Gen11 Server U54 HPE ProLiant ML350 Gen11 Server U63 HPE ProLiant DL320 Gen11 Server U58 HPE Alletra Storage Server 4120 I45 HPE Synergy 480 Gen11 Compute Module UBM5PIC firmware:sd:ubm     changed Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage 惠普企业 Hewlett Packard Enterprise 服务器选项 ServerOptions 服务器 Server 固件 - 系统 ROM Firmware - System 英语（美国） English (US)
  • iLO 6 version 1.62 or later is required for Gen12 servers
  • iLO 6 version 1.10 or later is required for Gen11 servers
  • iLO 5 version 2.72 or later is required for Gen10 Plus servers
    • ]]>
  • iLO 6 version 1.62 or later is required for Gen12 servers
  • iLO 6 version 1.10 or later is required for Gen11 servers
  • iLO 5 version 2.72 or later is required for Gen10 Plus servers
    • ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

        localhost OS example:
        ilorest flashfwpkg <file_name.fwpkg> 

        remote example:
        ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

        Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

         Update the firmware and software in the usual manner.

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

        localhost OS example:
        ilorest flashfwpkg <file_name.fwpkg> 

        remote example:
        ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

        Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

         Update the firmware and software in the usual manner.

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    ]]>         9675b54e-1c96-44c3-a7a1-901504000000 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:sd:ubm HPE_UBM4_1.24_G.fwpkg HPE_UBM4_1.24_G.fwpkg file://./packages/HPE_UBM4_1.24_G.fwpkg HPE_UBM4_1.24_G.HPb HPE_UBM4_1.24_G.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM4 Backplane PIC 0 True HPE_UBM4_1.24_G.HPb 600 1 True False False True Firmware True 9675b54e-1c96-44c3-a7a1-901504000000 1.24 FWPKG-v2 Firmware Bmc 2900027 tw 韌體 ─ 系統 en Firmware - System ko 펌웨어 - 시스템 ja ファームウェア - システム cn 固件 - 系统 ROM en This firmware package contains PLDM firmware for UBM4 storage backplanes. 68 en ServerOptions ko 서버 옵션 ja サーバ オプション cn 服务器选项 6 tw 伺服器 en Server ko 서버 ja サーバ cn 服务器 1e88e3b27b814bcdbc8dcf6390d324d1 4e14138c4c714237bcc8bfb333533ccd no yes 600 tw 安裝後無需重新啟動，更新就會生效，並維持硬體穩定。 en Reboot is not required after installation for updates to take effect and hardware stability to be maintained. ko 설치 후 재부팅하지 않아도 업데이트가 적용되고 하드웨어 안정성이 유지됩니다. ja アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。 cn 安装之后无需重启即可使更新生效并可保持硬件稳定性。 no 2024-09-13T04:53:37.9691164+00:00 en Hewlett Packard Enterprise cn 惠普企业 en Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage 11000 9675b54e-1c96-44c3-a7a1-901504000000 nvmeubmpicnew 0 0 Cross Operating System oi OEM 7 0 VMware ESXi 7.0 vmware_esx_server OEM 10 18999 17600 0 Microsoft Windows Server 2019 nt_x86-64 OEM 8 0 Red Hat Enterprise Linux 8 Server red_hat_enterprise_linux_x86_64 OEM 15 0 SUSE Linux Enterprise Server 15 suse_linux_enterprise_server_x86_64 OEM 10 25398 20317 0 Microsoft Windows Server 2022 nt_x86-64 OEM 8 0 VMware ESXi 8.0 vmware_esx_server OEM 9 0 Red Hat Enterprise Linux 9 Server red_hat_enterprise_linux_x86_64 OEM 10 17599 14393 0 Microsoft Windows Server 2016 nt_x86-64 OEM 7 0 Red Hat Enterprise Linux 7 Server red_hat_enterprise_linux_x86_64 OEM 12 0 SUSE Linux Enterprise Server 12 suse_linux_enterprise_server_x86_64 OEM 10 25399 0 Microsoft Windows Server 2025 nt_x86-64 OEM False 2024-10-12T08:36:12 1.0.0.0 A43 HPE ProLiant DL345 Gen10 Plus Server A42 HPE ProLiant DL385 Gen10 Plus v2 Server A42 HPE ProLiant DL365 Gen10 Plus Server U54 HPE ProLiant DL360 Gen11 Server U46 HPE ProLiant with vSphere Distributed Services Engine A55 HPE ProLiant DL365 Gen11 Server U69 HPE ProLiant Compute DL320 Gen12 SP Server U63 HPE ProLiant DL320 Gen11 Server A43 HPE ProLiant DL325 Gen10 Plus v2 Server R11 HPE ProLiant RL300 Gen11 U54 HPE ProLiant DL380 Gen11 Server I45 HPE Synergy 480 Gen11 Compute Module U59 HPE ProLiant DL560 Gen11 Server U71 HPE ProLiant Compute DL320 Gen12 Server A55 HPE ProLiant DL385 Gen11 Server A56 HPE ProLiant DL325 Gen11 Server A56 HPE ProLiant DL345 Gen11 Server U58 HPE Alletra 4110 Server U46 HPE ProLiant DL380 Gen10 Plus Server U46 HPE ProLiant DL360 Gen10 Plus Server U71 HPE ProLiant Compute DL340 Gen12 Server U58 HPE Alletra Storage Server 4120 U69 HPE ProLiant Compute DL340 Gen12 SP Server UBM4PIC firmware:sd:ubm     changed Agentless Management Service (iLO 6) for SUSE Linux Enterprise Server 15 for ARM-based Systems Agentless Management Service (iLO 6) for SUSE Linux Enterprise Server 15 for ARM-based Systems ams_sles15_aarch64 ams_sles15_aarch64 惠普企业 Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 for ARM Lights Out Lights Out 服务器 Server 软件 - 系统管理 Software - System Management 英语（美国） English (US)

  • amsd supported on HPE Gen11 Servers and later generations

  • amsd provides information to the iLO 6 service providing SNMP support.

    • ]]>

  • amsd supported on HPE Gen11 Servers and later generations

  • amsd provides information to the iLO 6 service providing SNMP support.

    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    • To install the package type:
      • rpm -Uvh amsd-<version>.rpm
    • To check whether the package is loaded properly type:
      • systemctl status amsd
      • systemctl status smad
    • Additional help is available by typing:
      • man amsd
    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    • To install the package type:
      • rpm -Uvh amsd-<version>.rpm
    • To check whether the package is loaded properly type:
      • systemctl status amsd
      • systemctl status smad
    • Additional help is available by typing:
      • man amsd
    ]]>         2f317b9d-c9e3-4d76-bff6-b9d0d085a952 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 103c 3307 1590 00E4 103c 3306 1590 00E4 103C 3306 1590 00E4 103C 3307 1590 00E4 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm amsd-3.5.0-1869.29.sles15.aarch64.rpm amsd-3.5.0-1869.29.sles15.aarch64.rpm file://./packages/amsd-3.5.0-1869.29.sles15.aarch64.rpm ./etc/sysconfig/ahslog ./etc/sysconfig/amsd ./etc/sysconfig/amsd_rev ./etc/sysconfig/cpqFca ./etc/sysconfig/cpqFca_rev ./etc/sysconfig/cpqIde ./etc/sysconfig/cpqIde_rev ./etc/sysconfig/cpqiScsi ./etc/sysconfig/smad ./etc/sysconfig/smad_rev ./opt/amsd ./opt/amsd/amsd.license ./sbin/ahslog ./sbin/cpqiScsi ./usr/lib/.build-id ./usr/lib/.build-id/36 ./usr/lib/.build-id/36/0c767768e978051378410ea153b5fa84845e03 ./usr/lib/.build-id/36/0c767768e978051378410ea153b5fa84845e03.1 ./usr/lib/.build-id/5a ./usr/lib/.build-id/5a/4be87152d2a5e284aaa200b92ff4f2cbf05076 ./usr/lib/.build-id/5a/4be87152d2a5e284aaa200b92ff4f2cbf05076.1 ./usr/lib/.build-id/78 ./usr/lib/.build-id/78/eff238e2a2ae45bd566ea7159466d79c9f94e1 ./usr/lib/.build-id/78/eff238e2a2ae45bd566ea7159466d79c9f94e1.1 ./usr/lib/.build-id/95 ./usr/lib/.build-id/95/c3cf71f62a382f6e45e2853d19050fd0f9dbbc ./usr/lib/.build-id/ad ./usr/lib/.build-id/ad/06f65ae6bf14ebba112f10aedd5eb6bf539fcb ./usr/lib/.build-id/ad/06f65ae6bf14ebba112f10aedd5eb6bf539fcb.1 ./usr/lib/.build-id/f0 ./usr/lib/.build-id/f0/152c4377985de2d1296245a4b24b8e394e4fcb ./usr/lib/systemd/system/ahslog.service ./usr/lib/systemd/system/amsd.service ./usr/lib/systemd/system/amsd_rev.service ./usr/lib/systemd/system/cpqFca.service ./usr/lib/systemd/system/cpqFca_rev.service ./usr/lib/systemd/system/cpqIde.service ./usr/lib/systemd/system/cpqIde_rev.service ./usr/lib/systemd/system/cpqiScsi.service ./usr/lib/systemd/system/smad.service ./usr/lib/systemd/system/smad_rev.service ./usr/lib/udev/rules.d/81-cpqFca.rules ./usr/lib/udev/rules.d/81-cpqiScsi.rules ./usr/share/man/man8/ahslog.8.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqIde.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/smad.8.gz ./usr/share/smartupdate/amsd/component.xml ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqFca_rev ./sbin/cpqIde ./sbin/cpqIde_rev ./sbin/smad ./sbin/smad_rev     changed Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 法语,英语（美国）,德语,意大利语,日语,西班牙语 French,English (US),German,Italian,Japanese,Spanish On RPM-based Linux system:

    Update firmware by installing the rpm:

    • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
    • The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.  
    • To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

    Updating firmware without installing the rpm:

    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
    • Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

    Additional Information:

    Installing the firmware rpm package does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

    ]]>         On RPM-based Linux system:

    Update firmware by installing the rpm:

    • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
    • The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.  
    • To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

    Updating firmware without installing the rpm:

    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
    • Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

    Additional Information:

    Installing the firmware rpm package does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

    ]]>         Deliverable Name:
             Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives

    Release Version and/or Date:
             HPK2

     

    ]]>         Deliverable Name:
             Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives

    Release Version and/or Date:
             HPK2

     

    ]]>         VV003840KXWBF VV007680KXWBL VV015360KXWBN CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-48624e387b-HPK2-1.1.aarch64.rpm firmware-hdd-48624e387b-HPK2-1.1.aarch64.rpm file://./packages/firmware-hdd-48624e387b-HPK2-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/CP062481.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/SP54304KHPK2.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062481.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP062481.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VV003840KXWBF 10 False SP54304KHPK2.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304b58574246 HPK2 VV007680KXWBL 10 False SP54304KHPK2.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304b5857424c HPK2 VV015360KXWBN 10 False SP54304KHPK2.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304b5857424e HPK2 Firmware RuntimeAgent     changed Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX631102AS-ADAT Online Firmware Upgrade Utility for Linux RPM aarch64 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM 网络 Networking 服务器 Server 固件 - 网络 Firmware - Network 英语（美国） English (US) pdating firmware with rpm installed:

    • Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gnu' location.
    • The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder. 
    • From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gnu/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
    • To uninstall, run: rpm -e <rpm_package_name>

    Updating firmware without installing rpm:

    • Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
    • This will extract the contents of the rpm to 'usr' folder in the current directory.
    • From the terminal, navigate to '/usr/lib/aarch64-linux-gnu/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

    On Secure Boot Enable mode:

    This product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
    Also, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.

    ]]>         pdating firmware with rpm installed:

    • Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gnu' location.
    • The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder. 
    • From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gnu/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
    • To uninstall, run: rpm -e <rpm_package_name>

    Updating firmware without installing rpm:

    • Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
    • This will extract the contents of the rpm to 'usr' folder in the current directory.
    • From the terminal, navigate to '/usr/lib/aarch64-linux-gnu/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

    On Secure Boot Enable mode:

    This product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
    Also, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.

    ]]>         This software package contains the following firmware versions:

    Mellanox Ethernet Only Adapters Firmware Version PSID
    Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) 26.41.1000 MT_0000000575
    ]]>         This software package contains the following firmware versions:

    Mellanox Ethernet Only Adapters Firmware Version PSID
    Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) 26.41.1000 MT_0000000575
    ]]>         15b3 101f 15b3 0012 15B3 101E 15B3 0012 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic_mlnx_mcx631102as_adat firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1.aarch64.rpm firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1.aarch64.rpm file://./packages/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1 ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/CP060897.xml ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/acpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/fw-ConnectX6Lx-rel-26_41_1000-MCX631102AS-ADA_Ax-UEFI-14.34.12-FlexBoot-3.7.400.signed.bin ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/ilorest_chif.so ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/mft-4.28.0-92.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/mlxfwmanager ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx631102as-adat-mt-0000000575-26.41.1000-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP060897.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP060897.scexe 79F0C163-0C13-4662-9DEA-09235FEF90CB MT_0000000575 10 .//fw-ConnectX6Lx-rel-26_41_1000-MCX631102AS-ADA_Ax-UEFI-14.34.12-FlexBoot-3.7.400.signed.bin 360 1 True Firmware False a6b1a447-382a-5a4f-15b3-101f15b30012 26.41.1000 ComboFirmware RuntimeAgent     changed Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage 惠普企业 Hewlett Packard Enterprise 服务器选项 ServerOptions 服务器 Server 固件 - 系统 ROM Firmware - System 英语（美国） English (US)
  • iLO 6 version 1.62 or later is required for Gen12 servers
  • iLO 6 version 1.10 or later is required for Gen11 servers
  • iLO 5 version 2.72 or later is required for Gen10P servers
    • ]]>
  • iLO 6 version 1.62 or later is required for Gen12 servers
  • iLO 6 version 1.10 or later is required for Gen11 servers
  • iLO 5 version 2.72 or later is required for Gen10P servers
    • ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

        localhost OS example:
        ilorest flashfwpkg <file_name.fwpkg> 

        remote example:
        ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

        Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

         Update the firmware and software in the usual manner.

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

        localhost OS example:
        ilorest flashfwpkg <file_name.fwpkg> 

        remote example:
        ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

        Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

         Update the firmware and software in the usual manner.

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    ]]>         9675b54e-1c96-44c3-a7a1-901506000000 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:sd:ubm HPE_UBM6_1.04_B.fwpkg HPE_UBM6_1.04_B.fwpkg file://./packages/HPE_UBM6_1.04_B.fwpkg HPE_UBM6_1.04_B.HPb HPE_UBM6_1.04_B.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM6 Backplane PIC 0 True HPE_UBM6_1.04_B.HPb 600 1 True False False True Firmware True 9675b54e-1c96-44c3-a7a1-901506000000 1.04 FWPKG-v2 Firmware Bmc 2900027 tw 韌體 ─ 系統 en Firmware - System ko 펌웨어 - 시스템 ja ファームウェア - システム cn 固件 - 系统 ROM en This firmware package contains PLDM firmware for UBM6 storage backplanes. ja このファームウェアパッケージには、UBM6ストレージバックプレーンのPLDMファームウェアが含まれています。 68 en ServerOptions ko 서버 옵션 ja サーバ オプション cn 服务器选项 6 tw 伺服器 en Server ko 서버 ja サーバ cn 服务器 923bb6bba3254a6d80257c1bf056f39d 15821a7ed6cf4e2fb9d903aa230d87ff no yes 600 tw 安裝後無需重新啟動，更新就會生效，並維持硬體穩定。 en Reboot is not required after installation for updates to take effect and hardware stability to be maintained. ko 설치 후 재부팅하지 않아도 업데이트가 적용되고 하드웨어 안정성이 유지됩니다. ja アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。 cn 安装之后无需重启即可使更新生效并可保持硬件稳定性。 no 2024-09-13T05:01:25.3546763+00:00 en Hewlett Packard Enterprise cn 惠普企业 en Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage 11000 9675b54e-1c96-44c3-a7a1-901506000000 nvmeubmpicnew 0 0 Cross Operating System oi OEM 7 0 VMware ESXi 7.0 vmware_esx_server OEM 10 18999 17600 0 Microsoft Windows Server 2019 nt_x86-64 OEM 8 0 Red Hat Enterprise Linux 8 Server red_hat_enterprise_linux_x86_64 OEM 15 0 SUSE Linux Enterprise Server 15 suse_linux_enterprise_server_x86_64 OEM 10 25398 20317 0 Microsoft Windows Server 2022 nt_x86-64 OEM 8 0 VMware ESXi 8.0 vmware_esx_server OEM 9 0 Red Hat Enterprise Linux 9 Server red_hat_enterprise_linux_x86_64 OEM 10 17599 14393 0 Microsoft Windows Server 2016 nt_x86-64 OEM 7 0 Red Hat Enterprise Linux 7 Server red_hat_enterprise_linux_x86_64 OEM 12 0 SUSE Linux Enterprise Server 12 suse_linux_enterprise_server_x86_64 OEM 10 25399 0 Microsoft Windows Server 2025 nt_x86-64 OEM False 2024-10-11T03:14:48 1.0.0.0 A43 HPE ProLiant DL345 Gen10 Plus Server A42 HPE ProLiant DL385 Gen10 Plus v2 Server A42 HPE ProLiant DL365 Gen10 Plus Server U54 HPE ProLiant DL360 Gen11 Server U32 HPE ProLiant DL360 Gen10 Server U46 HPE ProLiant with vSphere Distributed Services Engine A55 HPE ProLiant DL365 Gen11 Server U68 HPE ProLiant ML350 Gen12 Server U54 HPE ProLiant ML350 Gen11 Server U69 HPE ProLiant Compute DL320 Gen12 SP Server U63 HPE ProLiant DL320 Gen11 Server A43 HPE ProLiant DL325 Gen10 Plus v2 Server R11 HPE ProLiant RL300 Gen11 U54 HPE ProLiant DL380 Gen11 Server I45 HPE Synergy 480 Gen11 Compute Module U58 HPE ProLiant DL380a Gen11 U30 HPE ProLiant DL380 Gen10 Server HPE ProLiant DL580 Gen12 U68 HPE ProLiant DL380 Gen12 Server U59 HPE ProLiant DL560 Gen11 Server U71 HPE ProLiant Compute DL320 Gen12 Server A55 HPE ProLiant DL385 Gen11 Server A56 HPE ProLiant DL325 Gen11 Server A56 HPE ProLiant DL345 Gen11 Server U46 HPE ProLiant DL380 Gen10 Plus Server U46 HPE ProLiant DL360 Gen10 Plus Server U71 HPE ProLiant Compute DL340 Gen12 Server U68 HPE ProLiant DL360 Gen12 Server U63 HPE ProLiant ML110 Gen11 Server UBM6PIC firmware:sd:ubm     changed Online ROM Flash Firmware Package - HPE Integrated Lights-Out 6 Online ROM Flash Firmware Package - HPE Integrated Lights-Out 6 HPE Integrated Lights-Out 6 HPE Integrated Lights-Out 6 惠普企业 Hewlett Packard Enterprise Lights Out Lights Out 服务器 Server 固件 - Lights-Out Management Firmware - Lights-Out Management 英语（美国） English (US) Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
    for best performance:

    • RESTful Interface Tool (iLOREST) 5.2.0
    • HPQLOCFG v6.0.0
    • Lights-Out XML Scripting Sample bundle 6.00.0
    • HPONCFG Windows 6.0.0
    • HPONCFG Linux 6.0.0(A)
    • LOCFG v6.00.0 or later
    • HPLOMIG 6.0.0
    • Schema extender 6.1.0
    • Snap-in (x86) 6.0.0
    • Snap-in (x64) 6.0.0

    NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.

     

    NOTE: Below Points are applicable only for Intel and AMD

    •    Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
    •    The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
    •    The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).

     

    Supported Utilities for RL300

    Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
    •    RESTful Interface Tool (iLOREST) 4.8.0.0

    NOTE: Below Points are applicable only for RL300

    • Updated utilities and system libraries are required to support the iLO in High Security and Production Modes.
    • CNSA and FIPS mode are currently not supported. See the iLO 6 User Guide for the steps on how to disable FIPS and CNSA mode.
    • iLO Amplifier Pack, HPE GreenLake Compute Ops Management (COM), HPE OneView, and HPE Infosight for Servers do not support HPE ProLiant RL300 Gen 11 platform.
    • RedHat Enterprise Linux 8.6 is supported on HPE ProLiant RL300 servers

        For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide

    ]]>         Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
    for best performance:

    • RESTful Interface Tool (iLOREST) 5.2.0
    • HPQLOCFG v6.0.0
    • Lights-Out XML Scripting Sample bundle 6.00.0
    • HPONCFG Windows 6.0.0
    • HPONCFG Linux 6.0.0(A)
    • LOCFG v6.00.0 or later
    • HPLOMIG 6.0.0
    • Schema extender 6.1.0
    • Snap-in (x86) 6.0.0
    • Snap-in (x64) 6.0.0

    NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.

     

    NOTE: Below Points are applicable only for Intel and AMD

    •    Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
    •    The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
    •    The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).

     

    Supported Utilities for RL300

    Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
    •    RESTful Interface Tool (iLOREST) 4.8.0.0

    NOTE: Below Points are applicable only for RL300

    • Updated utilities and system libraries are required to support the iLO in High Security and Production Modes.
    • CNSA and FIPS mode are currently not supported. See the iLO 6 User Guide for the steps on how to disable FIPS and CNSA mode.
    • iLO Amplifier Pack, HPE GreenLake Compute Ops Management (COM), HPE OneView, and HPE Infosight for Servers do not support HPE ProLiant RL300 Gen 11 platform.
    • RedHat Enterprise Linux 8.6 is supported on HPE ProLiant RL300 servers

        For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide

    ]]>         To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

    This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    ]]>         To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

    This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    ]]>          

    iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

    http://www.hpe.com/info/ilo-docs

    Select your lights-out product, then support & documents, then manuals.

    • Check the online help for additional information about how to use features. 
      Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.
    ]]>          

    iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

    http://www.hpe.com/info/ilo-docs

    Select your lights-out product, then support & documents, then manuals.

    • Check the online help for additional information about how to use features. 
      Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.
    ]]>         2f317b9d-c9e3-4d76-bff6-b9d0d085a952 103c 3307 1590 00E4 103c 3306 1590 00E4 安装之后无需重启即可使更新生效并可保持硬件稳定性。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:ilo6 ilo6_165.fwpkg ilo6_165.fwpkg file://./packages/ilo6_165.fwpkg ilo6_165.bin ilo6_165.xml payload.json readme.txt 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 iLO 6 120 True ilo6_165.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910406 1.65 iLO 6 120 True ilo6_165.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910306 1.65 iLO 6 120 True ilo6_165.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910206 1.65 iLO 6 120 True ilo6_165.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910106 1.65 iLO 6 120 True ilo6_165.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910006 1.65 FWPKG-v2 ComboFirmware Bmc 2900213 fr Micrologiciel - Lights-Out Management en Firmware - Lights-Out Management cn 固件 - Lights-Out Management tw 韌體 ─ Lights─Out 管理 de Firmware - LOM (Lights-Out Management) ko 펌웨어 - Lights-Out 관리 ja ファームウェア - Lights-Outマネジメント es Firmware - Administración de apagado eléctrico en This component provides updated iLO firmware that can be installed directly on supported Operating Systems. This component can also be used to obtain the firmware image for updating via iLO user interface, utilities, or through the scripting interface. Additionally, this component can be used with the Smart Update Manager. 6 tw 伺服器 en Server ko 서버 ja サーバ cn 服务器 64 tw Lights-Out en Lights Out 994a0b6ce04a44b9b4daabf9aed11e4c 21a1ed958c534f5587cf1835e636e0d9 no no 600 tw 安裝後無需重新啟動，更新就會生效，並維持硬體穩定。 en Reboot is not required after installation for updates to take effect and hardware stability to be maintained. ko 설치 후 재부팅하지 않아도 업데이트가 적용되고 하드웨어 안정성이 유지됩니다. ja アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。 cn 安装之后无需重启即可使更新生效并可保持硬件稳定性。 no en Hewlett Packard Enterprise cn 惠普企业 en Online ROM Flash Firmware Package - HPE Integrated Lights-Out 6 70000 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 other 3307 00E4 1590 pci 103c 3306 00E4 1590 pci 103c 0 0 Cross Operating System oi OEM 7 0 VMware ESXi 7.0 vmware_esx_server OEM 8 0 VMware ESXi 8.0 vmware_esx_server OEM False 2024-11-14T05:23:32 1.0.0.0 U54 HPE ProLiant DL360 Gen11 Server U65 HPE ProLiant DL20 Gen11 A55 HPE ProLiant DL365 Gen11 Server U54 HPE ProLiant ML350 Gen11 Server U57 HPE Alletra Storage Server 4140 U63 HPE ProLiant DL320 Gen11 Server R11 HPE ProLiant RL300 Gen11 U54 HPE ProLiant DL380 Gen11 Server I45 HPE Synergy 480 Gen11 Compute Module U58 HPE ProLiant DL380a Gen11 A58 HPE ProLiant DL145 Gen11 U59 HPE ProLiant DL560 Gen11 Server U65 HPE ProLiant ML30 Gen11 A55 HPE ProLiant DL385 Gen11 Server A56 HPE ProLiant DL325 Gen11 Server A56 HPE ProLiant DL345 Gen11 Server U58 HPE Alletra 4110 Server U70 HPE ProLiant DL380a Gen12 U69 HPE ProLiant Compute DL320 Gen12 SP Server U62 HPE ProLiant DL110 Gen11 Server U63 HPE ProLiant ML110 Gen11 Server U58 HPE Alletra Storage Server 4120 U69 HPE ProLiant Compute DL340 Gen12 SP Server RI12 firmware:ilo6     changed Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 法语,英语（美国）,德语,意大利语,日语,西班牙语 French,English (US),German,Italian,Japanese,Spanish On RPM-based Linux system:

    Update firmware by installing the rpm:

    • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
    • The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.  
    • To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

    Updating firmware without installing the rpm:

    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
    • Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

    Additional Information:

    Installing the firmware rpm package does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

    ]]>         On RPM-based Linux system:

    Update firmware by installing the rpm:

    • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
    • The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.  
    • To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

    Updating firmware without installing the rpm:

    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
    • Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

    Additional Information:

    Installing the firmware rpm package does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

    ]]>         Deliverable Name:
             Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives

    Release Version and/or Date:
             HPK3

     

    ]]>         Deliverable Name:
             Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives

    Release Version and/or Date:
             HPK3

     

    ]]>         VS001920KXNXF VR000480KXNXE VR000960KXNZU CP043255.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware-hdd-2ba844ae8c-HPK3-1.1.aarch64.rpm firmware-hdd-2ba844ae8c-HPK3-1.1.aarch64.rpm file://./packages/firmware-hdd-2ba844ae8c-HPK3-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/CP062480.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/M7450ALLHPK3.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062480.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP062480.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VR000480KXNXE 10 False M7450ALLHPK3.rel 300 1 False Firmware False 562340a5-3052-3030-3438-304b584e5845 HPK3 VR000960KXNZU 10 False M7450ALLHPK3.rel 300 1 False Firmware False 562340a5-3052-3030-3936-304b584e5a55 HPK3 VS001920KXNXF 10 False M7450ALLHPK3.rel 300 1 False Firmware False 562340a5-3053-3130-3932-304b584e5846 HPK3 Firmware RuntimeAgent     changed Online NVMe SSD Flash Component for Linux (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives Online NVMe SSD Flash Component for Linux (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 法语,英语（美国）,德语,意大利语,日语,西班牙语 French,English (US),German,Italian,Japanese,Spanish On RPM-based Linux system:

    Update firmware by installing the rpm:

    • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
    • The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.  
    • To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

    Updating firmware without installing the rpm:

    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
    • Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

    Additional Information:

    Installing the firmware rpm package does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

    ]]>         On RPM-based Linux system:

    Update firmware by installing the rpm:

    • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
    • The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.  
    • To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

    Updating firmware without installing the rpm:

    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
    • Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

    Additional Information:

    Installing the firmware rpm package does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

    ]]>         Deliverable Name:
         Online NVMe SSD Flash Component for Linux (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives

    Release Version and/or Date:
         HPK5

     

    ]]>         Deliverable Name:
         Online NVMe SSD Flash Component for Linux (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives

    Release Version and/or Date:
         HPK5

     

    ]]>         MO001600KYDMU MO006400KYDND VO015360KYDNB VO007680KYDNA MO003200KYDNC VO001920KYDMT VO003840KYDMV CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-a27c95663d-HPK5-1.1.aarch64.rpm firmware-hdd-a27c95663d-HPK5-1.1.aarch64.rpm file://./packages/firmware-hdd-a27c95663d-HPK5-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/CP062044.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/GPM173XAHPK5.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062044.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP062044.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VO001920KYDMT 10 False GPM173XAHPK5.rel 300 1 False Firmware False 562340a5-304f-3130-3932-304b59444d54 HPK5 VO003840KYDMV 10 False GPM173XAHPK5.rel 300 1 False Firmware False 562340a5-304f-3330-3834-304b59444d56 HPK5 MO001600KYDMU 10 False GPM173XAHPK5.rel 300 1 False Firmware False 4d2340a5-304f-3130-3630-304b59444d55 HPK5 MO003200KYDNC 10 False GPM173XAHPK5.rel 300 1 False Firmware False 4d2340a5-304f-3330-3230-304b59444e43 HPK5 MO006400KYDND 10 False GPM173XAHPK5.rel 300 1 False Firmware False 4d2340a5-304f-3630-3430-304b59444e44 HPK5 VO007680KYDNA 10 False GPM173XAHPK5.rel 300 1 False Firmware False 562340a5-304f-3730-3638-304b59444e41 HPK5 VO015360KYDNB 10 False GPM173XAHPK5.rel 300 1 False Firmware False 562340a5-304f-3531-3336-304b59444e42 HPK5 Firmware RuntimeAgent     changed Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux RPM aarch64 Mellanox MCX623106AS-CDAT Online Firmware Upgrade Utility for Linux RPM aarch64 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM 网络 Networking 服务器 Server 固件 - 网络 Firmware - Network 英语（美国） English (US) Updating firmware with rpm installed:

    • Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gnu' location.
    • The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder. 
    • From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gnu/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
    • To uninstall, run: rpm -e <rpm_package_name>

    Updating firmware without installing rpm:

    • Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
    • This will extract the contents of the rpm to 'usr' folder in the current directory.
    • From the terminal, navigate to '/usr/lib/aarch64-linux-gnu/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

    On Secure Boot Enable mode:

    This product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
    Also, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.

    ]]>         Updating firmware with rpm installed:

    • Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/aarch64-linux-gnu' location.
    • The CPxxxxxx.scexe script will be located in the 'scexe-compat' folder. 
    • From the terminal, you can call the "./CPxxxxxx.scexe" under '/usr/lib/aarch64-linux-gnu/scexe-compat' location , to update the firmware (The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed).
    • To uninstall, run: rpm -e <rpm_package_name>

    Updating firmware without installing rpm:

    • Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
    • This will extract the contents of the rpm to 'usr' folder in the current directory.
    • From the terminal, navigate to '/usr/lib/aarch64-linux-gnu/scexe-compat' location and run " ./CPxxxxxx.scexe"" to update the firmware. The actual name of the 'firmware-nic-*' folder is determined based on the rpm installed.

    On Secure Boot Enable mode:

    This product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
    Also, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.

    ]]>         This software package contains the following firmware versions:

    Mellanox Ethernet Only Adapters Firmware Version PSID
    Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21) 22.41.1000 MT_0000000437

     

    ]]>         This software package contains the following firmware versions:

    Mellanox Ethernet Only Adapters Firmware Version PSID
    Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21) 22.41.1000 MT_0000000437

     

    ]]>         15B3 101D 15B3 0042 15B3 101e 15B3 0042 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic_mlnx_mcx623106as_cdat firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1.aarch64.rpm firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1.aarch64.rpm file://./packages/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1 ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/CP060895.xml ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/acpqsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/fw-ConnectX6Dx-rel-22_41_1000-MCX623106AS-CDA_Ax-UEFI-14.34.12-FlexBoot-3.7.400.signed.bin ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/ilorest_chif.so ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/mft-4.28.0-92.tgz ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/mlxfwmanager ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP060895.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP060895.scexe 79F0C163-0C13-4662-9DEA-09235FEF90CB MT_0000000437 10 .//fw-ConnectX6Dx-rel-22_41_1000-MCX623106AS-CDA_Ax-UEFI-14.34.12-FlexBoot-3.7.400.signed.bin 360 1 True Firmware False a6b1a447-382a-5a4f-15b3-101d15b30042 22.41.1000 ComboFirmware RuntimeAgent     changed Integrated Smart Update Tools for Linux ARM64 Integrated Smart Update Tools for Linux ARM64 Integrated Smart Update Tools for Linux ARM64 Integrated Smart Update Tools for Linux ARM64 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM Lights Out 服务器 Server 应用程序 - 系统管理 Application - System Management 英语（美国） English (US) For prerequisite information, please see the iSUT Release Notes.

    ]]>         For prerequisite information, please see the iSUT Release Notes.

    ]]>         Download the rpm package to a directory on your hard drive and change to that directory. Install by typing rpm -Uvh hpsut-XXX.x86_64.rpm.

    ]]>         Download the rpm package to a directory on your hard drive and change to that directory. Install by typing rpm -Uvh hpsut-XXX.x86_64.rpm.

    ]]>         103C 3307 1590 00E4 103C 3307 0000 0000 103C 3306 1590 00E4 103C 3306 0000 0000 安装后重启是可选操作。更新将在重启后生效。无需重启即可保持硬件稳定性。 Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 0 software:rpm sut-5.3.0-20.linux.aarch64.rpm Enter Polling interval in minutes. Minimum 5 minutes Maximum 1440 minutes. 0 12 0-9 * Mode in which SUT runs. 0 24 * * Enter the directory where the staging has to be done. The default path for staging directory is /var/tmp/sut/stagingdirectory. 0 255 0..9A..Z;a..z;-/ * Enter Polling interval in minutes. Minimum 5 minutes Maximum 1440 minutes. 0 12 0-9 * Mode in which SUT runs. 0 24 * * Enter the directory where the staging has to be done. The default path for staging directory is /var/tmp/sut/stagingdirectory. 0 255 0..9A..Z;a..z;-/ * sut-5.3.0-20.linux.aarch64.rpm file://./packages/sut-5.3.0-20.linux.aarch64.rpm ./opt/hp/hpsut/README.txt ./opt/sut/README.txt ./opt/sut/bin/26C2B797.pub ./opt/sut/bin/74C3A4A2.pub ./opt/sut/bin/B1275EA3.pub ./opt/sut/bin/gatherlogs.sh ./opt/sut/bin/hpsut ./opt/sut/bin/sut ./opt/sut/bin/x64/sum_drop_table_x64 ./opt/sut/config/sut_cfg_default.dat ./opt/sut/doc/OnDemandHelp.txt ./opt/sut/schemas/SUT.json ./opt/sut/schemas/SUTProvider.json ./opt/sut/schemas/SUTProvider_Gen10.json ./opt/sut/schemas/SUTRegistryEN_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryEN_Redfish.json ./opt/sut/schemas/SUTRegistryEN_Redfish_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings.json ./opt/sut/schemas/SUTSettingsSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSettingsSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings_Gen10.json ./opt/sut/schemas/SUTSystemInventorySchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSystemInventorySchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTTasksettings.json ./opt/sut/schemas/SUTTasksettings_Legacy_zipped.json.gz ./opt/sut/schemas/SUTTasksettings_Redfish_zipped.json.gz ./opt/sut/schemas/SUT_Gen10.json ./opt/sut/scripts/sut.service ./opt/sut/scripts/sutd ./usr/lib/.build-id ./usr/lib/.build-id/57 ./usr/lib/.build-id/57/374c6b2b55c3ea60f4ebaa7dfd1667b9b459f6 ./usr/lib/.build-id/6f ./usr/lib/.build-id/6f/eee3ef9d415a3e8398b5b1b9e9058e139ccc42 ./usr/share/man/man8/sut.8.gz ./usr/share/smartupdate/sut/component.xml     changed Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives 惠普企业 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 for ARM SUSE Linux Enterprise Server 15 for ARM 存储设备 Storage 固件 - PCIe NVMe存储磁盘 Firmware - PCIe NVMe Storage Disk 法语,英语（美国）,德语,意大利语,日语,西班牙语 French,English (US),German,Italian,Japanese,Spanish On RPM-based Linux system:

    Update firmware by installing the rpm:

    • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
    • The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.  
    • To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

    Updating firmware without installing the rpm:

    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
    • Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

    Additional Information:

    Installing the firmware rpm package does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

    ]]>         On RPM-based Linux system:

    Update firmware by installing the rpm:

    • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.rpm.  This extracts the contents of the rpm to the '/usr/lib/aarch64-linux-gnu' location.
    • The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder.  
    • To install firmware, run ./CP<nnnnnn>.scexe in the '/usr/lib/aarch64-linux-gnu/scexe-compat' location.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
    • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

    Updating firmware without installing the rpm:

    • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
    • Navigate to the 'usr/lib/aarch64-linux-gnu/scexe-compat' location and run ./CP<nnnnnn>.scexe to update the firmware.
    • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

    Additional Information:

    Installing the firmware rpm package does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

    ]]>         Deliverable Name:
         Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives

    Release Version and/or Date:
         HPK5

     

    ]]>         Deliverable Name:
         Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives

    Release Version and/or Date:
         HPK5

     

    ]]>         VV015360KXNTP VV007680KXNTN VV003840KXNTH CP041864.scexe 安装之后必须重启才能使更新生效并保持硬件稳定性。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:NVME firmware:sd:NVME firmware:sd:NVME firmware-hdd-f20279bc06-HPK5-1.1.aarch64.rpm firmware-hdd-f20279bc06-HPK5-1.1.aarch64.rpm file://./packages/firmware-hdd-f20279bc06-HPK5-1.1.aarch64.rpm ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1 ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/.cpq_package.inc ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/.setup ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/CP062047.xml ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/GPM1743SHPK5.rel ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/hpsetup ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/libsetup.so ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/payload.json ./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/setup ./usr/lib/aarch64-linux-gnu/hp-scexe-compat ./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062047.scexe ./usr/lib/aarch64-linux-gnu/scexe-compat ./usr/lib/aarch64-linux-gnu/scexe-compat/CP062047.scexe F6DE0320-2E0F-489A-B238-6DD8AE7C3811 VV003840KXNTH 10 False GPM1743SHPK5.rel 300 1 False Firmware False 562340a5-3056-3330-3834-304b584e5448 HPK5 VV007680KXNTN 10 False GPM1743SHPK5.rel 300 1 False Firmware False 562340a5-3056-3730-3638-304b584e544e HPK5 VV015360KXNTP 10 False GPM1743SHPK5.rel 300 1 False Firmware False 562340a5-3056-3531-3336-304b584e5450 HPK5 Firmware RuntimeAgent