(* This file is part of Lwt, released under the MIT license. See LICENSE.md for
   details, or visit https://github.com/ocsigen/lwt/blob/master/LICENSE.md. *)



(** Buffered byte channels *)

(** A {b channel} is a high-level object for performing input/output
    (IO). It allows to read/write from/to the outside world in an
    efficient way, by minimising the number of system calls.

    An {b output channel} is used to send data and an {b input
    channel} is used to receive data.

    If you are familiar with buffered channels you may be familiar too
    with the {b flush} operation. Note that byte channels of this
    module are automatically flushed when there is nothing else to do
    (i.e. before the program becomes idle), so this means that you no
    longer have to write:

    {[
      eprintf "log message\n";
      flush stderr;
    ]}

    to have your messages displayed.

    Note about errors: input functions of this module raise
    [End_of_file] when the end-of-file is reached (i.e. when the read
    function returns [0]). Other exceptions are ones caused by the
    backend read/write functions, such as {!Unix.Unix_error}.
*)

exception Channel_closed of string
  (** Exception raised when a channel is closed. The parameter is a
      description of the channel. *)

(** {2 Types} *)

type 'mode channel
  (** Type of buffered byte channels *)

type input
  (** Input mode *)

type output
  (** Output mode *)

(** Channel mode *)
type 'a mode =
  | Input : input mode
  | Output : output mode

val input : input mode
  (** [input] input mode representation *)

val output : output mode
  (** [output] output mode representation *)

type input_channel = input channel
    (** Type of input channels *)

type output_channel = output channel
    (** Type of output channels *)

val mode : 'a channel -> 'a mode
  (** [mode ch] returns the mode of a channel *)

(** {2 Well-known instances} *)

val stdin : input_channel
  (** The standard input, it reads data from {!Lwt_unix.stdin} *)

val stdout : output_channel
  (** The standard output, it writes data to {!Lwt_unix.stdout} *)

val stderr : output_channel
  (** The standard output for error messages, it writes data to
      {!Lwt_unix.stderr} *)

val zero : input_channel
  (** Inputs which returns always ['\x00'] *)

val null : output_channel
  (** Output which drops everything *)

(** {2 Channels creation/manipulation} *)

val pipe : ?cloexec : bool ->
  ?in_buffer : Lwt_bytes.t -> ?out_buffer : Lwt_bytes.t -> unit ->
  input_channel * output_channel
  (** [pipe ?cloexec ?in_buffer ?out_buffer ()] creates a pipe using
      {!Lwt_unix.pipe} and makes two channels from the two returned file
      descriptors *)

val make :
  ?buffer : Lwt_bytes.t ->
  ?close : (unit -> unit Lwt.t) ->
  ?seek : (int64 -> Unix.seek_command -> int64 Lwt.t) ->
  mode : 'mode mode ->
  (Lwt_bytes.t -> int -> int -> int Lwt.t) -> 'mode channel
  (** [make ?buffer ?close ~mode perform_io] is the
      main function for creating new channels.

      @param buffer user-supplied buffer. When this argument is
      present, its value will be used as the buffer for the created
      channel. The size of buffer must conform to the limitations
      described in {!set_default_buffer_size}.  When this argument is
      not present, a new internal buffer of default size will be
      allocated for this channel.

      Warning: do not use the same buffer for simultaneous work with more
      than one channel.

      There are other functions in this module that take a [buffer]
      argument, sharing the same semantics.

      @param close close function of the channel. It defaults to
      [Lwt.return]

      @param seek same meaning as {!Unix.lseek}

      @param mode either {!input} or {!output}

      @param perform_io is the read or write function. It is called
      when more input is needed or when the buffer need to be
      flushed. *)

val of_bytes : mode : 'mode mode -> Lwt_bytes.t -> 'mode channel
  (** Create a channel from a byte array. Reading/writing is done
      directly on the provided array. *)

val of_fd : ?buffer : Lwt_bytes.t -> ?close : (unit -> unit Lwt.t) ->
  mode : 'mode mode -> Lwt_unix.file_descr -> 'mode channel
  (** [of_fd ?buffer ?close ~mode fd] creates a channel from a
      file descriptor.

      @param close defaults to closing the file descriptor. *)

val of_unix_fd : ?buffer : Lwt_bytes.t -> ?close : (unit -> unit Lwt.t) ->
  mode : 'mode mode -> Unix.file_descr -> 'mode channel
  (** [of_unix_fd ?buffer ?close ~mode fd] is a short-hand for:

      [of_fd ?buffer ?close (Lwt_unix.of_unix_file_descr fd)] *)

val close : 'a channel -> unit Lwt.t
  (** [close ch] closes the given channel. If [ch] is an output
      channel, it performs all pending actions, flushes it and closes
      it. If [ch] is an input channel, it just closes it immediately.

      [close] returns the result of the close function of the
      channel. Multiple calls to [close] will return exactly the same
      value.

      Note: you cannot use [close] on channels obtained with
      {!atomic}. *)

val abort : 'a channel -> unit Lwt.t
  (** [abort ch] abort current operations and close the channel
      immediately. *)

val atomic : ('a channel -> 'b Lwt.t) -> ('a channel -> 'b Lwt.t)
  (** [atomic f] transforms a sequence of io operations into one
      single atomic io operation.

      Note:
      - the channel passed to [f] is invalid after [f] terminates
      - [atomic] can be called inside another [atomic] *)

val file_length : string -> int64 Lwt.t
(** Retrieves the length of the file at the given path. If the path refers to a
    directory, the returned promise is rejected with
    [Unix.(Unix_error (EISDIR, _, _))]. *)

val buffered : 'a channel -> int
  (** [buffered oc] returns the number of bytes in the buffer *)

val flush : output_channel -> unit Lwt.t
  (** [flush oc] performs all pending writes on [oc] *)

val flush_all : unit -> unit Lwt.t
  (** [flush_all ()] flushes all open output channels *)

val buffer_size : 'a channel -> int
  (** Returns the size of the internal buffer. *)

val resize_buffer : 'a channel -> int -> unit Lwt.t
  (** Resize the internal buffer to the given size *)

val is_busy : 'a channel -> bool
  (** [is_busy channel] returns whether the given channel is currently
      busy. A channel is busy when there is at least one job using it
      that has not yet terminated. *)

val is_closed : 'a channel -> bool
  (** [is_closed channel] returns whether the given channel is currently
      closed.

      @since 4.2.0 *)

(** {2 Random access} *)

val position : 'a channel -> int64
  (** [position ch] Returns the current position in the channel. *)

val set_position : 'a channel -> int64 -> unit Lwt.t
  (** [set_position ch pos] Sets the position in the output channel. This
      does not work if the channel does not support random access. *)

val length : 'a channel -> int64 Lwt.t
  (** Returns the length of the channel in bytes *)

(** {2 Reading} *)

(** Note: except for functions dealing with streams ({!read_chars} and
    {!read_lines}) all functions are {b atomic}. *)

val read_char : input_channel -> char Lwt.t
  (** [read_char ic] reads the next character of [ic].

      @raise End_of_file if the end of the file is reached *)

val read_char_opt : input_channel -> char option Lwt.t
  (** Same as {!Lwt_io.read_char}, but does not raise [End_of_file] on end of
      input *)

val read_chars : input_channel -> char Lwt_stream.t
  (** [read_chars ic] returns a stream holding all characters of
      [ic] *)

val read_line : input_channel -> string Lwt.t
  (** [read_line ic] reads one complete line from [ic] and returns it
      without the end of line. End of line is either ["\n"] or
      ["\r\n"].

      If the end of input is reached before reading any character,
      [End_of_file] is raised. If it is reached before reading an end
      of line but characters have already been read, they are
      returned. *)

val read_line_opt : input_channel -> string option Lwt.t
  (** Same as {!read_line} but do not raise [End_of_file] on end of
      input. *)

val read_lines : input_channel -> string Lwt_stream.t
  (** [read_lines ic] returns a stream holding all lines of [ic] *)

val read : ?count : int -> input_channel -> string Lwt.t
(** If [~count] is specified, [read ~count ic] reads at most [~count] bytes from
    [ic] in one read operation. Note that fewer than [~count] bytes can be read.
    This can happen for multiple reasons, including end of input, or no more
    data currently available. Check the size of the resulting string. [read]
    resolves with [""] if the input channel is already at the end of input.

    If [~count] is not specified, [read ic] reads all bytes until the end of
    input. *)

val read_into : input_channel -> bytes -> int -> int -> int Lwt.t
  (** [read_into ic buffer offset length] reads up to [length] bytes,
      stores them in [buffer] at offset [offset], and returns the
      number of bytes read.

      Note: [read_into] does not raise [End_of_file], it returns a
      length of [0] instead. *)

val read_into_exactly : input_channel -> bytes -> int -> int -> unit Lwt.t
  (** [read_into_exactly ic buffer offset length] reads exactly
      [length] bytes and stores them in [buffer] at offset [offset].

      @raise End_of_file on end of input *)

val read_into_bigstring : input_channel -> Lwt_bytes.t -> int -> int -> int Lwt.t

val read_into_exactly_bigstring : input_channel -> Lwt_bytes.t -> int -> int -> unit Lwt.t

val read_value : input_channel -> 'a Lwt.t
(** [read_value channel] reads a marshaled value from [channel]; it corresponds
    to the standard library's {!Stdlib.Marshal.from_channel}. The corresponding
    writing function is {!write_value}.

    Note that reading marshaled values is {e not}, in general, type-safe. See
    the warning in the description of module {!Stdlib.Marshal} for details. The
    short version is: if you read a value of one type, such as [string], when a
    value of another type, such as [int] has actually been marshaled to
    [channel], you may get arbitrary behavior, including segmentation faults,
    access violations, security bugs, etc. *)

(** {2 Writing} *)

(** Note: as for reading functions, all functions except
    {!write_chars} and {!write_lines} are {b atomic}.

    For example if you use {!write_line} in two different threads, the
    two operations will be serialized, and lines cannot be mixed.
*)

val write_char : output_channel -> char -> unit Lwt.t
  (** [write_char oc char] writes [char] on [oc] *)

val write_chars : output_channel -> char Lwt_stream.t -> unit Lwt.t
  (** [write_chars oc chars] writes all characters of [chars] on
      [oc] *)

val write : output_channel -> string -> unit Lwt.t
  (** [write oc str] writes all characters of [str] on [oc] *)

val write_line : output_channel -> string -> unit Lwt.t
  (** [write_line oc str] writes [str] on [oc] followed by a
      new-line. *)

val write_lines : output_channel -> string Lwt_stream.t -> unit Lwt.t
  (** [write_lines oc lines] writes all lines of [lines] to [oc] *)

val write_from : output_channel -> bytes -> int -> int -> int Lwt.t
  (** [write_from oc buffer offset length] writes up to [length] bytes
      to [oc], from [buffer] at offset [offset] and returns the number
      of bytes actually written *)

val write_from_bigstring : output_channel -> Lwt_bytes.t -> int -> int -> int Lwt.t

val write_from_string : output_channel -> string -> int -> int -> int Lwt.t
  (** See {!write}. *)

val write_from_exactly : output_channel -> bytes -> int -> int -> unit Lwt.t
  (** [write_from_exactly oc buffer offset length] writes all [length]
      bytes from [buffer] at offset [offset] to [oc] *)

val write_from_exactly_bigstring : output_channel -> Lwt_bytes.t -> int -> int -> unit Lwt.t

val write_from_string_exactly :
  output_channel -> string -> int -> int -> unit Lwt.t
  (** See {!write_from_exactly}. *)

val write_value :
  output_channel -> ?flags : Marshal.extern_flags list -> 'a -> unit Lwt.t
(** [write_value channel ?flags v] writes [v] to [channel] using the [Marshal]
    module of the standard library. See {!Stdlib.Marshal.to_channel} for an
    explanation of [?flags].

    The corresponding reading function is {!read_value}. See warnings about type
    safety in the description of {!read_value}. *)

(** {2 Printing} *)

(** These functions are basically helpers. Also you may prefer
    using the name {!printl} rather than {!write_line} because it is
    shorter.

    The general name of a printing function is [<prefix>print<suffixes>],

    where [<prefix>] is one of:
    - ['f'], which means that the function takes as argument a channel
    - nothing, which means that the function prints on {!stdout}
    - ['e'], which means that the function prints on {!stderr}

    and [<suffixes>] is a combination of:
    - ['l'] which means that a new-line character is printed after the message
    - ['f'] which means that the function takes as argument a {b format} instead
    of a string
*)

val fprint : output_channel -> string -> unit Lwt.t
val fprintl : output_channel -> string -> unit Lwt.t

val fprintf : output_channel -> ('a, unit, string, unit Lwt.t) format4 -> 'a
(** [%!] does nothing here. To flush the channel, use [Lwt_io.flush channel]. *)

val fprintlf : output_channel -> ('a, unit, string, unit Lwt.t) format4 -> 'a
(** [%!] does nothing here. To flush the channel, use [Lwt_io.flush channel]. *)

val print : string -> unit Lwt.t
val printl : string -> unit Lwt.t

val printf : ('a, unit, string, unit Lwt.t) format4 -> 'a
(** [%!] does nothing here. To flush the channel, use
    [Lwt_io.(flush stdout)]. *)

val printlf : ('a, unit, string, unit Lwt.t) format4 -> 'a
(** [%!] does nothing here. To flush the channel, use
    [Lwt_io.(flush stdout)]. *)

val eprint : string -> unit Lwt.t
val eprintl : string -> unit Lwt.t

val eprintf : ('a, unit, string, unit Lwt.t) format4 -> 'a
(** [%!] does nothing here. To flush the channel, use
    [Lwt_io.(flush stderr)]. *)

val eprintlf : ('a, unit, string, unit Lwt.t) format4 -> 'a
(** [%!] does nothing here. To flush the channel, use
    [Lwt_io.(flush stderr)]. *)

(** {2 Utilities} *)

val hexdump_stream : output_channel -> char Lwt_stream.t -> unit Lwt.t
  (** [hexdump_stream oc byte_stream] produces the same output as the
      command [hexdump -C]. *)

val hexdump : output_channel -> string -> unit Lwt.t
  (** [hexdump oc str = hexdump_stream oc (Lwt_stream.of_string str)] *)

(** {2 File utilities} *)

type file_name = string
    (** Type of file names *)

val open_file :
  ?buffer:Lwt_bytes.t ->
  ?flags:Unix.open_flag list ->
  ?perm:Unix.file_perm ->
  mode:'a mode ->
  file_name ->
    'a channel Lwt.t
(** [Lwt_io.open_file ~mode file] opens the given file, either for reading (with
    [~mode:Input]) or for writing (with [~mode:Output]). The returned channel
    provides buffered I/O on the file.

    If [~buffer] is supplied, it is used as the I/O buffer.

    If [~flags] is supplied, the file is opened with the given flags (see
    {!Unix.open_flag}). Note that [~flags] is used {e exactly} as given. For
    example, opening a file with [~flags] and [~mode:Input] does {e not}
    implicitly add [O_RDONLY]. So, you should include [O_RDONLY] when opening
    for reading ([~mode:Input]), and [O_WRONLY] when opening for writing
    ([~mode:Input]). It is also recommended to include [O_NONBLOCK], unless you
    are sure that the file cannot be a socket or a named pipe.

    The default permissions used for creating new files are [0o666], i.e.
    reading and writing are allowed for the file owner, group, and everyone.
    These default permissions can be overridden by supplying [~perm].

    Note: if opening for writing ([~mode:Output]), and the file already exists,
    [open_file] truncates (clears) the file by default. If you would like to
    keep the pre-existing contents of the file, use the [~flags] parameter to
    pass a custom flags list that does not include {!Unix.O_TRUNC}.

    @raise Unix.Unix_error on error. *)

val with_file :
  ?buffer:Lwt_bytes.t ->
  ?flags:Unix.open_flag list ->
  ?perm:Unix.file_perm ->
  mode:'a mode ->
  file_name ->
  ('a channel -> 'b Lwt.t) ->
    'b Lwt.t
(** [Lwt_io.with_file ~mode filename f] opens the given using
    {!Lwt_io.open_file}, and passes the resulting channel to [f].
    [Lwt_io.with_file] ensures that the channel is closed when the promise
    returned by [f] resolves, or if [f] raises an exception.

    See {!Lwt_io.open_file} for a description of the arguments, warnings, and
    other notes. *)

val open_temp_file :
  ?buffer:Lwt_bytes.t ->
  ?flags:Unix.open_flag list ->
  ?perm:Unix.file_perm ->
  ?temp_dir:string ->
  ?prefix:string ->
  ?suffix:string ->
  unit ->
    (string * output_channel) Lwt.t
(** [open_temp_file ()] starts creating a new temporary file, and evaluates to a
    promise for the pair of the file's name, and an output channel for writing
    to the file.

    The caller should take care to delete the file later. Alternatively, see
    {!Lwt_io.with_temp_file}.

    The [?buffer] and [?perm] arguments are passed directly to an internal call
    to {!Lwt_io.open_file}.

    If not specified, [?flags] defaults to
    [[O_CREATE; O_EXCL; O_WRONLY; O_CLOEXEC]]. If specified, the specified flags
    are used exactly. Note that these should typically contain at least
    [O_CREAT] and [O_EXCL], otherwise [open_temp_file] may open an existing
    file.

    [?temp_dir] can be used to choose the directory in which the file is
    created. For the current directory, use {!Stdlib.Filename.current_dir_name}.
    If not specified, the directory is taken from {!Stdlib.Filename.get_temp_dir_name},
    which is typically set to your system temporary file directory.

    [?prefix] helps determine the name of the file. It will be the prefix
    concatenated with a random sequence of characters. If not specified,
    [open_temp_file] uses some default prefix.

    [?suffix] is like [prefix], but it is appended at the end of the filename.
    In particular, it can be used to set the extension. This argument is
    supported since Lwt 4.4.0.

    @since 3.2.0 *)

val with_temp_file :
  ?buffer:Lwt_bytes.t ->
  ?flags:Unix.open_flag list ->
  ?perm:Unix.file_perm ->
  ?temp_dir:string ->
  ?prefix:string ->
  ?suffix:string ->
  (string * output_channel -> 'b Lwt.t) ->
    'b Lwt.t
(** [with_temp_file f] calls {!open_temp_file}[ ()], passing all optional
    arguments directly to it. It then attaches [f] to run after the file is
    created, passing the filename and output channel to [f]. When the promise
    returned by [f] is resolved, [with_temp_file] closes the channel and deletes
    the temporary file by calling {!Lwt_unix.unlink}.

    @since 3.2.0 *)

val create_temp_dir :
  ?perm:Unix.file_perm ->
  ?parent:string ->
  ?prefix:string ->
  ?suffix:string ->
  unit ->
    string Lwt.t
(** Creates a temporary directory, and returns a promise that resolves to its
    path. The caller must take care to remove the directory. Alternatively, see
    {!Lwt_io.with_temp_dir}.

    If [~perm] is specified, the directory is created with the given
    permissions. The default permissions are [0755].

    [~parent] is the directory in which the temporary directory is created. If
    not specified, the default value is the result of
    [Filename.get_temp_dir_name ()].

    [~prefix] is prepended to the directory name, and [~suffix] is appended to
    it.

    @since 4.4.0 *)

val with_temp_dir :
  ?perm:Unix.file_perm ->
  ?parent:string ->
  ?prefix:string ->
  ?suffix:string ->
  (string -> 'a Lwt.t) ->
    'a Lwt.t
(** [with_temp_dir f] first calls {!create_temp_dir}, forwarding all optional
    arguments to it. Once the temporary directory is created at [path],
    [with_temp_dir f] calls [f path]. When the promise returned by [f path] is
    resolved, [with_temp_dir f] recursively deletes the temporary directory and
    all its contents by calling {!Lwt_io.delete_recursively}.

    @since 4.4.0 *)

val delete_recursively : string -> unit Lwt.t
(** [delete_recursively path] attempts to delete the directory [path]
    and all its content recursively.

    This is likely VERY slow for directories with many files. That is probably
    best addressed by switching to blocking calls run inside a worker thread,
    i.e. with {!Lwt_preemptive}.

    @since 5.7.0 *)

val open_connection :
  ?fd : Lwt_unix.file_descr ->
  ?in_buffer : Lwt_bytes.t -> ?out_buffer : Lwt_bytes.t ->
  Unix.sockaddr -> (input_channel * output_channel) Lwt.t
  (** [open_connection ?fd ?in_buffer ?out_buffer addr] opens a
      connection to the given address and returns two channels for using
      it. If [fd] is not specified, a fresh one will be used.

      The connection is completely closed when you close both
      channels.

      @raise Unix.Unix_error on error.
  *)

val with_connection :
  ?fd : Lwt_unix.file_descr ->
  ?in_buffer : Lwt_bytes.t -> ?out_buffer : Lwt_bytes.t ->
  Unix.sockaddr -> (input_channel * output_channel -> 'a Lwt.t) -> 'a Lwt.t
  (** [with_connection ?fd ?in_buffer ?out_buffer addr f] opens a
      connection to the given address and passes the channels to
      [f] *)

(**/**)

(** This function is not public API and can be changed or removed without
    notice. It is exposed in order to test [with_connection].

    [with_close_connection f (ic, oc)] calls [f (ic, oc)] and makes sure that
    [ic] and [oc] are closed, whether [f] returns or fails with an exception.
    Does not fail if [ic] or [oc] is already closed. *)
val with_close_connection :
  (input_channel * output_channel -> 'a Lwt.t) ->
  input_channel * output_channel ->
  'a Lwt.t

(**/**)

type server
  (** Type of a server *)

val establish_server_with_client_socket :
  ?server_fd:Lwt_unix.file_descr ->
  ?backlog:int ->
  ?no_close:bool ->
  Unix.sockaddr ->
  (Lwt_unix.sockaddr -> Lwt_unix.file_descr -> unit Lwt.t) ->
    server Lwt.t
(** [establish_server_with_client_socket listen_address f] creates a server
    which listens for incoming connections on [listen_address]. When a client
    makes a new connection, it is passed to [f]: more precisely, the server
    calls

{[
f client_address client_socket
]}

    where [client_address] is the address (peer name) of the new client, and
    [client_socket] is the socket connected to the client.

    The server does not block waiting for [f] to complete: it concurrently tries
    to accept more client connections while [f] is handling the client.

    When the promise returned by [f] completes (i.e., [f] is done handling the
    client), [establish_server_with_client_socket] automatically closes
    [client_socket]. This is a default behavior that is useful for simple cases,
    but for a robust application you should explicitly close these channels
    yourself, and handle any exceptions as appropriate. If the channels are
    still open when [f] completes, and their automatic closing raises an
    exception, [establish_server_with_client_socket] treats it as an unhandled
    exception reaching the top level of the application: it passes that
    exception to {!Lwt.async_exception_hook}, the default behavior of which is
    to print the exception and {e terminate your process}.

    Automatic closing can be completely disabled by passing [~no_close:true].

    Similarly, if [f] raises an exception (or the promise it returns fails with
    an exception), [establish_server_with_client_socket] can do nothing with
    that exception, except pass it to {!Lwt.async_exception_hook}.

    [~server_fd] can be specified to use an existing file descriptor for
    listening. Otherwise, a fresh socket is created internally. In either case,
    [establish_server_with_client_socket] will internally assign
    [listen_address] to the server socket.

    [~backlog] is the argument passed to {!Lwt_unix.listen}. Its default value
    is [SOMAXCONN], which varies by platform and socket kind.

    The returned promise (a [server Lwt.t]) resolves when the server has just
    started listening on [listen_address]: right after the internal call to
    [listen], and right before the first internal call to [accept].

    @since 4.1.0 *)

val establish_server_with_client_address :
  ?fd:Lwt_unix.file_descr ->
  ?buffer_size:int ->
  ?backlog:int ->
  ?no_close:bool ->
  Unix.sockaddr ->
  (Lwt_unix.sockaddr -> input_channel * output_channel -> unit Lwt.t) ->
    server Lwt.t
(** Like {!Lwt_io.establish_server_with_client_socket}, but passes two buffered
    channels to the connection handler [f]. These channels wrap the client
    socket.

    The channels are closed automatically when the promise returned by [f]
    resolves. To avoid this behavior, pass [~no_close:true].

    @since 3.1.0 *)

val shutdown_server : server -> unit Lwt.t
(** Closes the given server's listening socket. The returned promise resolves
    when the [close(2)] system call completes. This function does not affect the
    sockets of connections that have already been accepted, i.e. passed to [f]
    by {!establish_server}.

    @since 3.0.0 *)

val lines_of_file : file_name -> string Lwt_stream.t
  (** [lines_of_file name] returns a stream of all lines of the file
      with name [name]. The file is automatically closed when all
      lines have been read. *)

val lines_to_file : file_name -> string Lwt_stream.t -> unit Lwt.t
  (** [lines_to_file name lines] writes all lines of [lines] to
      file with name [name]. *)

val chars_of_file : file_name -> char Lwt_stream.t
  (** [chars_of_file name] returns a stream of all characters of the
      file with name [name]. As for {!lines_of_file} the file is
      closed when all characters have been read. *)

val chars_to_file : file_name -> char Lwt_stream.t -> unit Lwt.t
  (** [chars_to_file name chars] writes all characters of [chars] to
      [name] *)

(** {2 Input/output of integers} *)

(** Common interface for reading/writing integers in binary *)
module type NumberIO = sig

  (** {3 Reading} *)

  val read_int : input_channel -> int Lwt.t
    (** Reads a 32-bits integer as an ocaml int *)

  val read_int16 : input_channel -> int Lwt.t
  val read_int32 : input_channel -> int32 Lwt.t
  val read_int64 : input_channel -> int64 Lwt.t

  val read_float32 : input_channel -> float Lwt.t
    (** Reads an IEEE single precision floating point value *)

  val read_float64 : input_channel -> float Lwt.t
    (** Reads an IEEE double precision floating point value *)

  (** {3 Writing} *)

  val write_int : output_channel -> int -> unit Lwt.t
    (** Writes an ocaml int as a 32-bits integer *)

  val write_int16 : output_channel -> int -> unit Lwt.t
  val write_int32 : output_channel -> int32 -> unit Lwt.t
  val write_int64 : output_channel -> int64 -> unit Lwt.t

  val write_float32 : output_channel -> float -> unit Lwt.t
    (** Writes an IEEE single precision floating point value *)

  val write_float64 : output_channel -> float -> unit Lwt.t
    (** Writes an IEEE double precision floating point value *)
end

module LE : NumberIO
  (** Reading/writing of numbers in little-endian *)

module BE : NumberIO
  (** Reading/writing of numbers in big-endian *)

include NumberIO
(** Reading/writing of numbers in the system endianness. *)

type byte_order = Lwt_sys.byte_order = Little_endian | Big_endian
    (** Type of byte order *)

val system_byte_order : byte_order
  (** Same as {!val:Lwt_sys.byte_order}. *)

(** {2 Low-level access to the internal buffer} *)

val block : 'a channel  -> int -> (Lwt_bytes.t -> int -> 'b Lwt.t) -> 'b Lwt.t
  (** [block ch size f] pass to [f] the internal buffer and an
      offset. The buffer contains [size] chars at [offset]. [f] may
      read or write these chars.  [size] must satisfy [0 <= size <= 16] *)

(** Information for directly accessing the internal buffer of a
    channel *)
type direct_access = {
  da_buffer : Lwt_bytes.t;
  (** The internal buffer *)
  mutable da_ptr : int;
  (** The pointer to:
      - the beginning of free space for output channels
      - the beginning of data for input channels *)
  mutable da_max : int;
  (** The maximum offset *)
  da_perform : unit -> int Lwt.t;
  (** - for input channels:
        refills the buffer and returns how many bytes have been read
      - for output channels:
        flush partially the buffer and returns how many bytes have been
        written *)
}

val direct_access : 'a channel -> (direct_access -> 'b Lwt.t) -> 'b Lwt.t
  (** [direct_access ch f] passes to [f] a {!type:direct_access}
      structure. [f] must use it and update [da_ptr] to reflect how
      many bytes have been read/written. *)

(** {2 Misc} *)

val default_buffer_size : unit -> int
  (** Return the default size for buffers. Channels that are created
      without a specific buffer use new buffer of this size. *)

val set_default_buffer_size : int -> unit
  (** Change the default buffer size.

      @raise Invalid_argument if the given size is smaller than [16]
      or greater than {!Stdlib.Sys.max_string_length} *)

(** {2 Deprecated} *)

val establish_server :
  ?fd : Lwt_unix.file_descr ->
  ?buffer_size : int ->
  ?backlog : int ->
  ?no_close : bool ->
  Unix.sockaddr -> (input_channel * output_channel -> unit Lwt.t) ->
    server Lwt.t
  [@@ocaml.deprecated
"  Since Lwt 3.1.0, use Lwt_io.establish_server_with_client_address"]
(** Like [establish_server_with_client_address], but does not pass the client
    address or fd to the callback [f].

    @deprecated Use {!establish_server_with_client_address}.
    @since 3.0.0 *)

(** Versioned variants of APIs undergoing breaking changes. *)
module Versioned :
sig
  val establish_server_1 :
    ?fd : Lwt_unix.file_descr ->
    ?buffer_size : int ->
    ?backlog : int ->
    Unix.sockaddr -> (input_channel * output_channel -> unit) ->
      server
    [@@ocaml.deprecated
" Deprecated in favor of Lwt_io.establish_server. See
   https://github.com/ocsigen/lwt/pull/258"]
  (** Old version of {!Lwt_io.establish_server}. The current
      {!Lwt_io.establish_server} automatically closes channels passed to the
      callback, and notifies the caller when the server's listening socket is
      bound.

      @deprecated Use {!Lwt_io.establish_server_with_client_address}.
      @since 2.7.0 *)

  val establish_server_2 :
    ?fd : Lwt_unix.file_descr ->
    ?buffer_size : int ->
    ?backlog : int ->
    ?no_close : bool ->
    Unix.sockaddr -> (input_channel * output_channel -> unit Lwt.t) ->
      server Lwt.t
    [@@ocaml.deprecated
" In Lwt >= 3.0.0, this is an alias for Lwt_io.establish_server."]
  (** Since Lwt 3.0.0, this is just an alias for {!Lwt_io.establish_server}.

      @deprecated Use {!Lwt_io.establish_server_with_client_address}.
      @since 2.7.0 *)

  val shutdown_server_1 : server -> unit
    [@@ocaml.deprecated
" Deprecated in favor of Lwt_io.shutdown_server. See
   https://github.com/ocsigen/lwt/issues/259"]
  (** Old version of {!Lwt_io.shutdown_server}. The current
      {!Lwt_io.shutdown_server} returns a promise, which resolves when the
      server's listening socket is closed.

      @deprecated Use {!Lwt_io.shutdown_server}.
      @since 2.7.0 *)

  val shutdown_server_2 : server -> unit Lwt.t
    [@@ocaml.deprecated
" In Lwt >= 3.0.0, this is an alias for Lwt_io.shutdown_server."]
  (** Since Lwt 3.0.0, this is just an alias for {!Lwt_io.shutdown_server}.

      @deprecated Use {!Lwt_io.shutdown_server}.
      @since 2.7.0 *)
end
