<?xml version="1.0" encoding="UTF-8"?>

<PropertyList>
  <name>Preflight by Engineer</name>
  <description>The Engineer performs the Preflight-Check and -Preparations in the Crew Cabin</description>
  <timeofday>dawn</timeofday>

  <init>
    <set>
      <property>/sim/current-view/view-number</property>
      <value>0</value>
    </set>
  </init>

<!--***************************************-->
<!-- Documents, Outside, PAX, cargosection check skipped; toilet check left to apprentice -->

<!--***************************************-->
<!-- Fill level of oxygen bottles skipped -->

<!--***************************************-->
  <step>
    <message>
	So early... I didn't even had breakfast. It's always the poor engineer's job to do the first checks!
	While the rest of my dear crew 's still happily enjoying their coffee...
    </message>
   <wait>2</wait>
  </step>

  <step>
    <message>
	Our apprentice should have already checked PAX and cargo compartement
	...and has hopefully emptied the toilet's retention tank...
    </message>
   <wait>2</wait>
  </step>

  <step>
    <message>
	So let's begin with...
    </message>
   <wait>1</wait>
  </step>

  <step>
    <message>
	INSTRUMENT PANELS: Fixated and sturdy
    </message>
    <view>
      <heading-offset-deg>25</heading-offset-deg>
      <pitch-offset-deg>-33</pitch-offset-deg>
      <field-of-view>98</field-of-view>
    </view>
   <wait>1</wait>
  </step>

 <step>
    <message>
	-
    </message>
    <view>
      <heading-offset-deg>313</heading-offset-deg>
      <pitch-offset-deg>-23</pitch-offset-deg>
      <field-of-view>86</field-of-view>
    </view>
   <wait>1</wait>
  </step>

  <step>
    <message>
	INSTRUMENTS: Looking good
    </message>
    <view>
      <heading-offset-deg>340</heading-offset-deg>
      <pitch-offset-deg>-24</pitch-offset-deg>
      <field-of-view>60</field-of-view>
    </view>
   <wait>2</wait>
  </step>

<!--***************************************-->
  <step>
    <message>
	______________________________________________________________________________
	Checking position of all SWITCHES and FUSES on FUSE and CIRCUIT BREAKER PANELS
    </message>
    <view>
      <heading-offset-deg>240</heading-offset-deg>
      <pitch-offset-deg>-23</pitch-offset-deg>
      <field-of-view>37.5</field-of-view>
    </view>
    <set>
     <property>an24/animations/RK_hood</property>
     <value>1.0</value>
    </set>
   <wait>2</wait>
  </step>

  <step>
    <message>
	AC fuses
    </message>
    <view>
      <heading-offset-deg>267</heading-offset-deg>
      <pitch-offset-deg>-35</pitch-offset-deg>
      <field-of-view>37.5</field-of-view>
      <x-offset-m>-0.38</x-offset-m>
      <y-offset-m>1.27</y-offset-m>
      <z-offset-m>-5.13</z-offset-m>
    </view>
   <wait>2</wait>
  </step>

  <step>
    <message>
	DIM fuses
    </message>
    <view>
      <heading-offset-deg>276</heading-offset-deg>
      <pitch-offset-deg>9</pitch-offset-deg>
      <field-of-view>37.5</field-of-view>
    </view>
   <wait>2</wait>
  </step>

  <step>
    <message>
	Switch on ALL CIRCUIT BREAKERS on AZS PANEL
	(by clicking the hotspots to the right of each row)
    </message>
    <view>
      <heading-offset-deg>270</heading-offset-deg>
      <pitch-offset-deg>-11.5</pitch-offset-deg>
      <field-of-view>46</field-of-view>
    </view>
    <set>
     <property>sim/panel-hotspots</property>
     <value>1.0</value>
    </set>
    <exit>
      <condition>
        <property>an24/AZS/sw0101</property>
        <property>an24/AZS/sw0102</property>
        <property>an24/AZS/sw0103</property>
        <property>an24/AZS/sw0104</property>
        <property>an24/AZS/sw0105</property>
        <property>an24/AZS/sw0106</property>

        <property>an24/AZS/sw0108</property>
        <property>an24/AZS/sw0109</property>
        <property>an24/AZS/sw0110</property>
        <property>an24/AZS/sw0111</property>
        <property>an24/AZS/sw0112</property>
        <property>an24/AZS/sw0113</property>
        <property>an24/AZS/sw0114</property>
        <property>an24/AZS/sw0115</property>
        <property>an24/AZS/sw0116</property>
        <property>an24/AZS/sw0117</property>
        <property>an24/AZS/sw0118</property>

        <property>an24/AZS/sw0201</property>
        <property>an24/AZS/sw0202</property>
        <property>an24/AZS/sw0203</property>
        <property>an24/AZS/sw0204</property>
        <property>an24/AZS/sw0205</property>
        <property>an24/AZS/sw0206</property>
        <property>an24/AZS/sw0207</property>
        <property>an24/AZS/sw0208</property>
        <property>an24/AZS/sw0209</property>
        <property>an24/AZS/sw0210</property>
        <property>an24/AZS/sw0211</property>
        <property>an24/AZS/sw0212</property>
        <property>an24/AZS/sw0213</property>
        <property>an24/AZS/sw0214</property>
        <property>an24/AZS/sw0215</property>
        <property>an24/AZS/sw0216</property>
        <property>an24/AZS/sw0217</property>
        <property>an24/AZS/sw0218</property>

        <property>an24/AZS/sw0301</property>
        <property>an24/AZS/sw0302</property>
        <property>an24/AZS/sw0303</property>
        <property>an24/AZS/sw0304</property>
        <property>an24/AZS/sw0305</property>
        <property>an24/AZS/sw0306</property>

        <property>an24/AZS/sw0308</property>
        <property>an24/AZS/sw0309</property>
        <property>an24/AZS/sw0310</property>

        <property>an24/AZS/sw0312</property>
        <property>an24/AZS/sw0313</property>
        <property>an24/AZS/sw0314</property>
        <property>an24/AZS/sw0315</property>
        <property>an24/AZS/sw0316</property>
        <property>an24/AZS/sw0317</property>
        <property>an24/AZS/sw0318</property>

        <property>an24/AZS/sw0401</property>
        <property>an24/AZS/sw0402</property>
        <property>an24/AZS/sw0403</property>
        <property>an24/AZS/sw0404</property>

        <property>an24/AZS/sw0406</property>
        <property>an24/AZS/sw0407</property>
        <property>an24/AZS/sw0408</property>
        <property>an24/AZS/sw0409</property>
        <property>an24/AZS/sw0410</property>
        <property>an24/AZS/sw0411</property>
        <property>an24/AZS/sw0412</property>
        <property>an24/AZS/sw0413</property>
        <property>an24/AZS/sw0414</property>
        <property>an24/AZS/sw0415</property>
        <property>an24/AZS/sw0416</property>
        <property>an24/AZS/sw0417</property>
        <property>an24/AZS/sw0418</property>

        <property>an24/AZS/sw0504</property>

        <property>an24/AZS/sw0506</property>
        <property>an24/AZS/sw0507</property>
        <property>an24/AZS/sw0508</property>
        <property>an24/AZS/sw0509</property>
        <property>an24/AZS/sw0510</property>
        <property>an24/AZS/sw0511</property>
        <property>an24/AZS/sw0512</property>
        <property>an24/AZS/sw0513</property>
        <property>an24/AZS/sw0514</property>
        <property>an24/AZS/sw0515</property>
        <property>an24/AZS/sw0516</property>
        <property>an24/AZS/sw0517</property>
        <property>an24/AZS/sw0518</property>

        <property>an24/AZS/sw0602</property>
        <property>an24/AZS/sw0603</property>
        <property>an24/AZS/sw0604</property>
        <property>an24/AZS/sw0605</property>


        <property>an24/AZS/sw0608</property>
        <property>an24/AZS/sw0609</property>
        <property>an24/AZS/sw0610</property>
        <property>an24/AZS/sw0611</property>
        <property>an24/AZS/sw0612</property>
        <property>an24/AZS/sw0613</property>
        <property>an24/AZS/sw0614</property>
        <property>an24/AZS/sw0615</property>
        <property>an24/AZS/sw0616</property>
        <property>an24/AZS/sw0617</property>
        <property>an24/AZS/sw0618</property>

        <property>an24/AZS/sw0701</property>
        <property>an24/AZS/sw0702</property>
        <property>an24/AZS/sw0703</property>
        <property>an24/AZS/sw0704</property>
        <property>an24/AZS/sw0705</property>
        <property>an24/AZS/sw0706</property>
        <property>an24/AZS/sw0707</property>
        <property>an24/AZS/sw0708</property>
        <property>an24/AZS/sw0709</property>
        <property>an24/AZS/sw0710</property>
        <property>an24/AZS/sw0711</property>
        <property>an24/AZS/sw0712</property>
        <property>an24/AZS/sw0713</property>
        <property>an24/AZS/sw0714</property>
        <property>an24/AZS/sw0715</property>
        <property>an24/AZS/sw0716</property>
        <property>an24/AZS/sw0717</property>
        <property>an24/AZS/sw0718</property>
      </condition>
    </exit>
  </step>

<!--***************************************-->
  <step>
    <message>
	_____________________________________________
	PITOT and STATIC PORT VALVES on left console:
	In normal position (turned right)
    </message>
    <view>
     <heading-offset-deg>47</heading-offset-deg>
     <pitch-offset-deg>-51</pitch-offset-deg>
     <field-of-view>65</field-of-view>
     <x-offset-m>-0.47</x-offset-m>
     <y-offset-m>1.26</y-offset-m>
     <z-offset-m>-5.6</z-offset-m>
    </view>
    <marker>
    <x-m>2.6</x-m>
    <y-m>-0.975</y-m>
    <z-m>0.48</z-m>
     <scale>7</scale>
    </marker>
    <set>
     <property>sim/panel-hotspots</property>
     <value>0.0</value>
    </set>
    <exit>
      <condition>
       <greater-than>
        <property>an24/Pressure/pitotvalve1</property>
	<value>0.9</value>
       </greater-than>
       <greater-than>
        <property>an24/Pressure/pitotvalve2</property>
	<value>0.9</value>
       </greater-than>
      </condition>
    </exit>
  </step>

  <step>
    <message>
	PITOT VALVE on right console:
	In normal position (turned right)
    </message>
    <view>
      <heading-offset-deg>280</heading-offset-deg>
      <pitch-offset-deg>-25</pitch-offset-deg>
      <field-of-view>57</field-of-view>
    </view>
    <marker>
    <x-m>2.579</x-m>
    <y-m>1.007</y-m>
    <z-m>0.6</z-m>
     <scale>4</scale>
    </marker>
    <exit>
      <condition>
       <greater-than>
        <property>an24/Pressure/pitotvalve3</property>
	<value>0.9</value>
       </greater-than>
      </condition>
    </exit>
  </step>

<!--***************************************-->
  <step>
    <message>
	________________________________________
      	GEAR and FLAP switches:	NEUTRAL position
        Gear first...
    </message>
    <view>
      <heading-offset-deg>296</heading-offset-deg>
      <pitch-offset-deg>-52</pitch-offset-deg>
      <field-of-view>48</field-of-view>
    </view>
    <marker>
    <x-m>2.64</x-m>
    <y-m>0.11</y-m>
    <z-m>0.53</z-m>
     <scale>1.8</scale>
    </marker>
    <exit>
      <condition>
       <equals>
        <property>gear/gear[0]/position-norm</property>
	<value>0.0</value>
       </equals>
      </condition>
    </exit>
  </step>

  <step>
    <message>
      	...flap second
    </message>
    <view>
      <heading-offset-deg>317</heading-offset-deg>
      <pitch-offset-deg>-51</pitch-offset-deg>
      <field-of-view>61</field-of-view>
    </view>
    <marker>
    <x-m>2.63</x-m>
    <y-m>-0.11</y-m>
    <z-m>0.525</z-m>
     <scale>1</scale>
    </marker>
    <!--exit>
      <condition>
       <equals>
        <property>an24/animations/flap-lever</property>
	<value>0.0</value>
       </equals>
      </condition>
    </exit-->
   <wait>4</wait>
  </step>


  <step>
    <message>
	_________________________________
      	STEERING switch: NEUTRAL position
    </message>
    <view>
      <heading-offset-deg>27</heading-offset-deg>
      <pitch-offset-deg>-35</pitch-offset-deg>
      <field-of-view>42</field-of-view>
    </view>
    <marker>
    <x-m>2.128</x-m>
    <y-m>-0.8626</y-m>
    <z-m>0.628</z-m>
     <scale>1</scale>
    </marker>
    <exit>
      <condition>
       <equals>
        <property>an24/gear/steer_mode</property>
	<value>1.0</value>
       </equals>
      </condition>
    </exit>
  </step>

<!--***************************************-->
<!-- Sealing of "Start-in-Air" switch; stop-valves; upora from Anschlag; feathering skipped -->

<!--***************************************-->
  <step>
    <message>
	_______________________________________________________
      	FUEL LEVEL and INDICATION CHECK:
	Have to turn on left and right fuel level indication...
    </message>
    <view>
      <heading-offset-deg>326</heading-offset-deg>
      <pitch-offset-deg>-31</pitch-offset-deg>
      <field-of-view>36</field-of-view>
    </view>
    <marker>
     <x-m>2.115</x-m>
     <y-m>0.068</y-m>
     <z-m>0.642</z-m>
     <scale>3.5</scale>
    </marker>
    <exit>
      <condition>
       <equals>
        <property>an24/FuelControl/fuel-meter-l</property>
	<value>1.0</value>
       </equals>
       <equals>
        <property>an24/FuelControl/fuel-meter-r</property>
	<value>1.0</value>
       </equals>
      </condition>
    </exit>
  </step>

  <step>
    <message>
      	...and turn fuel level indication knob to "SUM"...
    </message>
    <view>
      <heading-offset-deg>317</heading-offset-deg>
      <pitch-offset-deg>-21</pitch-offset-deg>
      <field-of-view>30</field-of-view>
    </view>
    <marker>
     <x-m>2.1</x-m>
     <y-m>0.278</y-m>
     <z-m>0.84</z-m>
     <scale>3</scale>
    </marker>
    <marker>
     <x-m>2.1</x-m>
     <y-m>0.267</y-m>
     <z-m>0.92</z-m>
     <scale>3.5</scale>
    </marker>
<!-- Set secretly in the background... -->
     <nasal>
      <script>
	setprop("an24/RTMS/fuel-offset-l", (getprop("/consumables/fuel/tank/level-kg") + getprop("/consumables/fuel/tank[1]/level-kg") + getprop("/consumables/fuel/tank[2]/level-kg")) * -2.2 );
	setprop("an24/RTMS/fuel-offset-r", (getprop("/consumables/fuel/tank[3]/level-kg") + getprop("/consumables/fuel/tank[4]/level-kg") + getprop("/consumables/fuel/tank[5]/level-kg")) * -2.2 );
      </script>
     </nasal>
    <exit>
      <condition>
       <equals>
        <property>an24/PG4and2PPT1/selected-ind</property>
	<value>-18.0</value>
       </equals>
      </condition>
    </exit>
  </step>

  <step>
    <message>
      	...then I check fuel level on 2PPT1
    </message>
    <view>
      <heading-offset-deg>317</heading-offset-deg>
      <pitch-offset-deg>-18</pitch-offset-deg>
      <field-of-view>31</field-of-view>
    </view>
    <marker>
     <x-m>2.09</x-m>
     <y-m>0.267</y-m>
     <z-m>0.92</z-m>
     <scale>3.5</scale>
    </marker>
   <wait>4</wait>
  </step>

  <step>
    <message>
	_________________________________
      	Now I turn on FUEL FLOW METERS...
    </message>
    <view>
      <heading-offset-deg>324</heading-offset-deg>
      <pitch-offset-deg>-28</pitch-offset-deg>
      <field-of-view>36</field-of-view>
    </view>
    <marker>
     <x-m>2.113</x-m>
     <y-m>0.1411</y-m>
     <z-m>0.642</z-m>
    <scale>2</scale>
    </marker>
    <exit>
      <condition>
       <equals>
        <property>an24/FuelControl/flow-meter</property>
	<value>1.0</value>
       </equals>
      </condition>
    </exit>
  </step>

  <step>
    <message>
      	...and set the corresponding FUEL LEVEL in each wing by scrolling down the counter
	(Shift + Click/Scroll to accelerate)
    </message>
    <view>
      <heading-offset-deg>333</heading-offset-deg>
      <pitch-offset-deg>-27</pitch-offset-deg>
      <field-of-view>35</field-of-view>
    </view>
    <marker>
    <x-m>2.09</x-m>
    <y-m>-0.047</y-m>
    <z-m>0.767</z-m>
    <scale>2.5</scale>
    </marker>
   <wait>1</wait>
  </step>

  <step>
    <message>
      	Alright, our apprentice already set it! Good girl!
    </message>
    <message>
      	Alright, our apprentice already set it! Good boy!
    </message>
    <marker>
    <x-m>2.09</x-m>
    <y-m>-0.047</y-m>
    <z-m>0.74</z-m>
    <scale>1.5</scale>
    </marker>
  </step>

<!--***************************************-->
<!-- "Check: Complete fill of extraction group" (Flugzeughandbuch, p. 77, "complete" doesn't make sense to me...); oil and
hydraulic fluids level check skipped  -->

<!--***************************************-->
  <step>
    <message>
	_____________________________________________________
      	So let's check NEUTRAL AILERON and RUDDER TRIM now...
    </message>
    <view>
      <heading-offset-deg>309</heading-offset-deg>
      <pitch-offset-deg>-50</pitch-offset-deg>
      <field-of-view>67</field-of-view>
    </view>
    <marker>
    <x-m>2.51</x-m>
    <y-m>-0.1</y-m>
    <z-m>0.559</z-m>
     <scale>3.7</scale>
    </marker>
    <exit>
    </exit>
  </step>
  <step>
    <message>
      	...Front switch for aileron, rearward for rudder trim -
	(Green lights indicate neutral trim)
    </message>
    <marker>
    <x-m>2.51</x-m>
    <y-m>-0.11</y-m>
    <z-m>0.559</z-m>
     <scale>3.7</scale>
    </marker>
    <exit>
      <condition>
      <and>
       <or>
       <greater-than>
        <property>controls/flight/aileron-trim</property>
	<value>-0.001</value>
       </greater-than>
       <less-than>
        <property>controls/flight/aileron-trim</property>
	<value>0.001</value>
       </less-than>
       </or>
       <or>
       <greater-than>
        <property>controls/flight/rudder-trim</property>
	<value>-0.001</value>
       </greater-than>
       <less-than>
        <property>controls/flight/rudder-trim</property>
	<value>0.001</value>
       </less-than>
       </or>
      </and>
      </condition>
    </exit>
  </step>

<!--***************************************-->
  <step>
    <message>
	_________________________
      	Back to the fuel system -
	PUMPS and VALVES now
    </message>
    <view>
      <heading-offset-deg>315</heading-offset-deg>
      <pitch-offset-deg>-18</pitch-offset-deg>
      <field-of-view>57</field-of-view>
    </view>
    <marker>
     <x-m>2.08</x-m>
     <y-m>0.15</y-m>
     <z-m>0.875</z-m>
     <scale>8</scale>
    </marker>
   <wait>1</wait>
  </step>

  <step>
    <message>
      	LEFT CUT-OFF VALVE and its SIGNALING LIGHT check first
    </message>
    <view>
     <heading-offset-deg>343</heading-offset-deg>
     <pitch-offset-deg>-18</pitch-offset-deg>
     <field-of-view>56</field-of-view>
     <x-offset-m>-0.08</x-offset-m>
     <y-offset-m>1.23</y-offset-m>
     <z-offset-m>-5.6</z-offset-m>
    </view>
    <marker>
     <x-m>2.08</x-m>
     <y-m>0.15</y-m>
     <z-m>0.875</z-m>
     <scale>8</scale>
    </marker>
   <wait>2</wait>
  </step>

  <step>
    <message>
      	OPEN, CLOSE, OPEN, CLOSE, OPEN.......
    </message>
     <nasal>
      <script>
	interpolate("an24/FuelControl/sw0401", 1.0, 0.1, 1.0, 0.8, 0.0, 0.1, 0.0, 0.8, 1.0, 0.1 );
	interpolate("an24/FuelControl/cutoff-l-by-sw", 0.0, 0.1, 0.0, 0.8, 1.0, 0.1, 1.0, 0.8, 0.0, 0.0 );
      </script>
     </nasal>
    <marker>
     <x-m>2.08</x-m>
     <y-m>0.15</y-m>
     <z-m>0.875</z-m>
     <scale>8</scale>
    </marker>
   <wait>3</wait>
  </step>

  <step>
    <message>
      	Same for the RIGHT CUT-OFF VALVE
      	OPEN, CLOSE, OPEN.......	
    </message>
     <nasal>
      <script>
	interpolate("an24/FuelControl/sw0407", 1.0, 0.1, 1.0, 0.8, 0.0, 0.1, 0.0, 0.8, 1.0, 0.1 );
	interpolate("an24/FuelControl/cutoff-r-by-sw", 0.0, 0.1, 0.0, 0.8, 1.0, 0.1, 1.0, 0.8, 0.0, 0.0 );
      </script>
     </nasal>
    <marker>
     <x-m>2.08</x-m>
     <y-m>0.15</y-m>
     <z-m>0.875</z-m>
     <scale>8</scale>
    </marker>
   <wait>3</wait>
  </step>

  <step>
    <message>
      	FUEL PUMPS check... MAIN GROUP PUMPS...
	up is AUTO
    </message>
     <nasal>
      <script>
	interpolate("an24/FuelControl/sw0402", 1.0, 0.1 );
	interpolate("an24/FuelControl/sw0406", 0.0, 1.5, 1.0, 0.1 );
      </script>
     </nasal>
    <marker>
     <x-m>2.08</x-m>
     <y-m>0.15</y-m>
     <z-m>0.875</z-m>
     <scale>8</scale>
    </marker>
  </step>

  <step>
    <message>
      	MANUAL: down
    </message>
     <nasal>
      <script>
	interpolate("an24/FuelControl/sw0402", 0.0, 0.1, -1.0, 0.1 );
	interpolate("an24/FuelControl/sw0406", 1.0, 1.8, 0.0, 0.1, -1.0, 0.1 );
      </script>
     </nasal>
  </step>

  <step>
    <message>
      	neutral is OFF
    </message>
     <nasal>
      <script>
	interpolate("an24/FuelControl/sw0402", 0.0, 0.1 );
	interpolate("an24/FuelControl/sw0406", -1.0, 0.5, 0.0, 0.1 );
      </script>
     </nasal>
  </step>

  <step>
    <message>
      	PUMPS of GROUP 2 check...
	ON and OFF
    </message>
     <nasal>
      <script>
	interpolate("an24/FuelControl/sw0403", 1.0, 0.1, 1.0, 1.5, 0.0, 0.1 );
        interpolate("an24/FuelControl/lrear463_press", 1.0, 0.1, 1.0, 1.5, 0.0, 0.1 );
        interpolate("an24/FuelControl/lfront463_press", 1.0, 0.1, 1.0, 1.5, 0.0, 0.1 );
	interpolate("an24/FuelControl/sw0405", 0.0, 2.5, 1.0, 0.1, 1.0, 0.5, 0.0, 0.1 );
        interpolate("an24/FuelControl/rrear463_press", 0.0, 2.5, 1.0, 0.1, 1.0, 0.5, 0.0, 0.1 );
        interpolate("an24/FuelControl/rfront463_press", 0.0, 2.5, 1.0, 0.1, 1.0, 0.5, 0.0, 0.1 );
      </script>
     </nasal>
  </step>

  <step>
    <message>
      	And finally: CROSSFEED VALVE!
	Breakfast is coming nearer!
    </message>
     <nasal>
      <script>
        interpolate("an24/FuelControl/crossfeed", 1.0, 0.1, 1.0, 0.5, 0.0, 0.1 );
        interpolate("an24/FuelControl/sw_crossfeed", 1.0, 0.1, 1.0, 0.5, 0.0, 0.1 );
      </script>
     </nasal>
  </step>

<!--***************************************-->

  <step>
    <message>
	_____________________________________
      	Not many checks left...
	FIRE EXTINGUISHING SYSTEM for example
    </message>
    <view>
      <heading-offset-deg>55</heading-offset-deg>
      <pitch-offset-deg>7</pitch-offset-deg>
      <field-of-view>70</field-of-view>
      <x-offset-m>-0.38</x-offset-m>
      <y-offset-m>1.27</y-offset-m>
      <z-offset-m>-5.13</z-offset-m>
    </view>
  </step>

  <step>
    <message>
	SENSORS check would be next, but...
    </message>
    <view>
      <heading-offset-deg>74</heading-offset-deg>
      <pitch-offset-deg>20</pitch-offset-deg>
      <field-of-view>76</field-of-view>
      <x-offset-m>-0.38</x-offset-m>
      <y-offset-m>1.27</y-offset-m>
      <z-offset-m>-5.13</z-offset-m>
    </view>
  <wait>3</wait>
  </step>

  <step>
    <message>
	...No! I think I gonna join the rest of the crew first and
	finally	have my breakfast...
    </message>
<!-- and im gonna end this incomplete tutorial until now because im hungry too! -->
    <view>
      <heading-offset-deg>74</heading-offset-deg>
      <pitch-offset-deg>20</pitch-offset-deg>
      <field-of-view>76</field-of-view>
      <x-offset-m>-0.38</x-offset-m>
      <y-offset-m>1.27</y-offset-m>
      <z-offset-m>-5.13</z-offset-m>
    </view>
  <wait>4</wait>
  </step>

  <step>
    <message>
	BLINIS!
    </message>
    <view>
      <heading-offset-deg>74</heading-offset-deg>
      <pitch-offset-deg>20</pitch-offset-deg>
      <field-of-view>76</field-of-view>
      <x-offset-m>-0.38</x-offset-m>
      <y-offset-m>1.27</y-offset-m>
      <z-offset-m>-5.13</z-offset-m>
    </view>
  </step>


</PropertyList>
